Page 110 - ISCAR FACE GROOVING LINES

FACE GROOVE-TURN GDMM-CC 29.95 Ref. CW
Single-Ended Utility Insert RE BW
for External Rough Grooving
and Side Turning with a
Frontal Chip Splitter

METRIC Tough 1 Hard Recommended
Dimensions Machining Data

IC830 f face-groove
IC354
CW RE CWTOL(1) RETOL(2) IC808
7.00 0.80 0.05 0.050 IC907
Designation 8.00 0.80 0.05 0.050 BW (mm/rev)
GDMM 7CC 6.00 •
GDMM 8CC 5.60 • •• 0.30-0.45

0.30-0.45

• For cutting speed recommendations, see pages 161-173
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
For tools, see pages: • GAFG-R/L-8 (87) • GHFG-R/L-8 (83) • GHFGR/L-8 (84)

GDMM-CC 1.18 Ref. CW
Single-Ended Utility Insert RE BW
for External Rough Grooving
and Side Turning with a
Frontal Chip Splitter

INCH Tough 1 Hard Recommended
Dimensions Machining Data

IC830 f face-groove
IC354
CW RE CWTOL(1) RETOL(2) IC808
.0020 IC907
Designation .0020 BW (IPR)
.236 •
GDMM 7CC .276 .0315 .0020 .220 • •• .0118-.0177
GDMM 8CC
.315 .0315 .0020 .0118-.0177

• For cutting speed recommendations, see pages 161-173
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
For tools, see pages: • GAFG-R/L-8 (87) • GHFG-R/L-8 (83) • GHFGR/L-8 (84)

108 ISCAR