Page 131 - ISCAR FACE GROOVING LINES
P. 131
PENTA 34F-RS/LS CDX ±0.04 34IC908
Pentagonal Inserts for Face DAXN CDX
Grooving and Recessing Along FACE GROOVE-TURNDAXN
Shafts up to 5 mm Depth of Cut CW RE
at a Minimum of 22 mm Diameter Recommended Machining Data
METRIC f face-groove
Dimensions (mm/rev)
0.08-0.12
Designation CW RE CDX DAXN(1) 0.08-0.12
0.08-0.15
PENTA 34F239-0.15-22R/LS 2.39 0.15 5.00 22.0 • 0.08-0.15
PENTA 34F247-0.20-22R/LS 2.47 0.20 5.00 22.0 •
3.00 0.40 5.00 22.0 •
PENTA 34F300-0.40-22R/LS 4.00 0.40 5.00 22.0 •
PENTA 34F400-0.40-22R/LS
• For cutting speed recommendations, see pages 162-164
(1) Minimum axial grooving diameter
For tools, see pages: PCHPRS/LS (130)
PENTA 34F-RS/LS CDX ±.0016 1.33
Pentagonal Inserts for Face DAXN CDX
Grooving and Recessing Along DAXN
Shafts up to .197" Depth of Cut CW RE
at a Minimum of .866" Diameter
INCH Recommended Machining Data
Dimensions
Designation CW RE CDX DAXN(1) IC908 f face-groove
PENTA 34F239-0.15-22R/LS .094 .0059 .197 .87 • (IPR)
PENTA 34F247-0.20-22R/LS .097 .0079 .197 .87 • .0031-.0047
.118 .0157 .197 .87 • .0031-.0047
PENTA 34F300-0.40-22R/LS .157 .0157 .197 .87 • .0031-.0059
PENTA 34F400-0.40-22R/LS .0031-.0059
• For cutting speed recommendations, see pages 162-164
(1) Minimum axial grooving diameter
For tools, see pages: PCHPRS/LS (130)
129
