Page 129 - ISCAR FACE GROOVING LINES

PCHPR/L LH CDX FACE GROOVE-TURN
Perpendicular Holders H
Carrying Inserts with 5 Cutting HF
Edges for Facing, Grooving, HBH LF
Parting and Recessing B Lock
OAL

WF CWN-CWX Right-hand shown

Designation H B M ET R IC WF LF OAL LH HBH
16.0 16.0 CWN(1) CWX(2) CDX(3) HF 1.50 (5) 23.5 120.00 11.5 -
PCHPR/L 16-24 20.0 20.0 3.20 (4) 6.50 16.0 1.50 (5) 28.0 120.00 11.5 -
PCHPR/L 20-24 25.0 25.0 0.50 3.20 (4) 6.50 20.0 1.50 (5) 33.0 135.00 11.5 -
PCHPR/L 25-24 20.0 20.0 0.50 3.20 (4) 6.50 25.0 1.90 34.0 120.00 15.0 6.0
PCHPR/L 20-34 25.0 25.0 0.50 10.00 20.0 1.90 34.0 135.00 15.0 -
PCHPR/L 25-34 1.40 4.00 10.00 25.0
1.40 4.00

(1) Minimum cutting width
(2) Maximum cutting width
(3) For specific information, refer to insert data
(4) Up to 6.2 mm width may be ordered on request
(5) Valid for inserts with CW<3.2 mm
For inserts, see pages: PENTA 34F-R/L (122)

Spare Parts SR 16-212-01397 T-20/5
SR 16-212-01397L T-20/5
Designation SR 16-212-01397 T-20/5
PCHPL 16-24 SR 16-212-01397L T-20/5
PCHPR 16-24 SR 16-212-01397 T-20/5
PCHPL 20-24 SR 16-212-01397L T-20/5
PCHPR 20-24 SR 16-212-01397 T-20/5
PCHPL 25-24 SR 16-212-01397 T-20/5
PCHPR 25-24
PCHPR/L 20-34
PCHPR/L 25-34

127