Page 142 - HOLE MAKING CATALOG p001-148
P. 142
INDEXABLE DRILLS XCGT-DT W1 PNA S
Inserts used on Chamfering
Drill Holders for Chamfering INSL
and Drilling in One Operation
Dimensions Tough 1 Hard
PNA
IC08
30.0 • • IC808
45.0 • •
Designation W1 INSL S 60.0 • •
30.0 • •
XCGT 060300-30DT 6.18 12.30 2.80 45.0 • •
XCGT 060300-45DT 6.18 12.30 2.80 60.0 • •
12.30 2.80
XCGT 060300-60DT 6.18 16.00 3.30
XCGT 090300-30DT 8.50 16.00 3.30
16.00 3.30
XCGT 090300-45DT 8.50
XCGT 090300-60DT 8.50
For tools, see pages: CHAMRING (139)
DC_2 m7 LCF OAL LS
PL SDL
SCDT
Pre-Thread Solid Carbide DC 140° DCONMSh6
Drills with Coolant Holes
45°
LU
Dimensions
Designation DC SDL DCONMS FTDZ(1) DC_2 PL LU LCF OAL LS IC908
SCDT 025-009-060-M3 2.50 8.8 6.00 M3 4.00 0.450 16.00 20.0 62.00 36.0 •
•
SCDT 033-011-060-M4 3.30 11.4 6.00 M4 4.50 0.600 19.00 24.0 62.00 36.0 •
SCDT 042-014-060-M5 4.20 13.6 6.00 M5 5.50 0.760 22.00 28.0 66.00 36.0 •
SCDT 050-017-080-M6 5.00 16.5 8.00 M6 6.60 0.910 27.00 34.0 79.00 40.0 •
SCDT 068-021-100-M8 6.80 21.0 10.00 M8 9.00 1.240 38.00 47.0 89.00 40.0 •
SCDT 085-026-120-M10 8.50 25.5 12.00 M10 11.00 1.550 45.00 55.0 102.00 40.0
• For user guide and cutting conditions, see pages 175-184
(1) Used for standard thread size
140 ISCAR