Page 145 - HOLE MAKING CATALOG p001-148

EPSR S XCMT 040104R-MF IC908
EPSR
XCMT-MF S MULTIFUNCTION TOOLS
Inserts for DR-MF Multifunction
Tools with Two Cutting IC IC
Edges for Hard Materials AN
and Interrupted Cut AN
RE L Fig. 1 RE L Fig. 2

Dimensions

Designation IC L S RE AN EPSR Fig.
2•
XCMT 040104R/L-MF 4.40 6.37 1.70 0.40 7.0 83.5 1•

XCMT 050204-MF 5.60 5.60 2.10 0.40 7.0 83.5 1•

XCMT 060204-MF 6.40 6.40 2.38 0.40 7.0 83.5 1•

XCMT 070304-MF 7.50 7.50 3.18 0.40 7.0 83.5 1•

XCMT 080304-MF 8.40 8.40 3.18 0.40 7.0 83.5 1•

XCMT 10T304-MF 10.50 10.50 3.97 0.40 7.0 83.5 1•

XCMT 10T308-MF 10.50 10.50 3.97 0.80 7.0 83.5 1•

XCMT 130404-MF 13.40 13.40 4.76 0.40 7.0 83.5 1•

XCMT 130408-MF 13.40 13.40 4.76 0.80 7.0 83.5 1•

XCMT 170508-MF 17.40 17.40 5.56 0.80 7.0 83.5

For tools, see pages: DRG-MF (142)

XCMT-MG RE CDX 7°
Two Cutting Edged Internal CW
Grooving Inserts for DR-MF S
Multifunction Tools
Dimensions Tough 1 Hard Recommended
Designation Machining Data
XCMT 05R-15718015MG
XCMT 05R-201802-MG IC808 f turn f groove
XCMT 06R-17820018MG IC808G
XCMT 06R-202002-MG CW CDX(1) CWTOL(2) RE S (mm/rev) (mm/rev)
XCMT 07R-19620015MG 2.28 •
XCMT 07R-252002-MG 1.57 1.80 0.02 0.15 • 0.03-0.07 0.03-0.06
XCMT 08R-22125015MG
XCMT 08R-252502-MG 2.00 1.80 0.02 0.20 2.28 0.05-0.10 0.04-0.07
XCMT 10R-23930015MG 2.28 •
XCMT 10R-303003-MG 1.78 1.80 0.02 0.18 • 0.04-0.08 0.04-0.07
XCMT 13R-31835020MG
XCMT 13R-353503-MG 2.00 2.00 0.02 0.20 2.65 0.05-0.10 0.04-0.07
XCMT 17R-404004-MG 2.28 •
1.96 1.80 0.02 0.15 • 0.05-0.10 0.04-0.07
(1) Cutting depth maximum
(2) Cutting width tolerance (+/-) 2.50 2.00 0.02 0.20 3.41 0.07-0.12 0.05-0.10
For tools, see pages: DRG-MF (142) 3.41 •
2.21 2.00 0.02 0.15 • 0.06-0.11 0.04-0.08

2.50 2.50 0.02 0.20 3.50 0.07-0.12 0.05-0.10
3.41 •
2.39 2.00 0.02 0.15 • 0.07-0.12 0.05-0.10

3.00 3.00 0.02 0.30 4.34 0.14-0.18 0.06-0.12
5.18 •
3.18 3.50 0.02 0.20 • 0.14-0.18 0.06-0.12

3.50 3.50 0.02 0.30 5.25 • 0.14-0.20 0.07-0.14

4.00 4.00 0.02 0.40 6.00 0.15-0.21 0.08-0.15

143