Page 106 - HOLE MAKING CATALOG p185-310
P. 106
GUNDRILLS USER GUIDE
Inquiry Form
DC 0 BD
-0.07 DCONMSh6
PL LU LS
LF
1. Tool Sketch of drilling application
Quantity
Nominal diameter and tolerance
Please fill in dimensions on the sketch.
Driver
For standard drivers please
use codes from page 292
o Code No.
o Special, please attach sketch and specifications.
2. Workpiece Note: It may be necessary to change several of the parameters that you
(If possible, attach a drawing) indicated, based on our experience with your application.
2.1 Material 3.2 Cutting Data:
Material description
(DIN material number or any other standard): Cutting Speed Vc m/min
Revolutions Nmin RPM, Nmax
RPM
Hardness and Properties: Feed Fmin mm/rev,
Fmax mm/rev
2.2 Hole Type Feed Rate VF mm/min
o Blind Hole
o Angled Entry o Drilling into Pre-hole Coolant:
o Drilling into Solid
Drilling Depth o Boring o Angled Exit o Oil o Soluble Oil o Other
Coolant Pressure: Bar
2.3 Application:
Workpiece: mm Hole Tolerance
Tool:
o Stationary o Rotating
3. Machine o Stationary o Rotating
3.1 Technical Data
Specially Tailored TRIDEEP Code Key
Machine Type GD - DH # # . # # - # # # # - # #
Power
kW
Dia. Drilling Shank
length Type
290 ISCAR