Page 26 - HOLE MAKING CATALOG p311-382
P. 26
REAMERS Insert Designation Code Key 4 B 12 IC907
RM SEI Insert Lead Type Rake Carbide
Size Angle Grade
Reamer Single Edge Insert A, B, C
RM-SEI-B 1.3 a°
Single-Edged Reaming Inserts S
for General Applications at 30° 3°
High Cutting Speeds
W1
L
Dimensions Tough 1 Hard
SSC(1) IC30N
IC07
IC507
IC907
Designation a° L W1 S
RM-SEI-1B-00 1.0 0 15.50 2.80 1.50 •
RM-SEI-1B-06 1.0 6 15.50 2.80 1.50 • •
15.50 2.80 1.50 • •
RM-SEI-1B-12 1.0 12 15.50 3.60 1.50 •
RM-SEI-2B-00 2.0 0 15.50 3.60 1.50 • •
RM-SEI-2B-06 2.0 6 15.50 3.60 1.50 • •
17.00 4.40 2.00 •
RM-SEI-2B-12 2.0 12 17.00 4.40 2.00 • •
RM-SEI-3B-00 3.0 0 17.00 4.40 2.00 • •
22.50 6.60 3.00 • • •
RM-SEI-3B-06 3.0 6 22.50 6.60 3.00 • •
RM-SEI-3B-12 3.0 12
RM-SEI-4B-06 4.0 6
RM-SEI-4B-12 4.0 12
• Lead type of insert should be compatible with lead type of the tool
(1) Insert size
For tools, see pages: RM-SET-B-B (335) • RM-SET-T-B (334)
RM-SEI-A 15° 3° 3.0 a°
Single-Edged Reaming Inserts S
for High Surface Quality at
Low Cutting Conditions W1
L
Dimensions Tough 1 Hard
SSC(1) a° W1 IC507
IC907
Designation 1.0 6 L 2.80 S
2.0 6 3.60
RM-SEI-1A-06 3.0 6 15.50 4.40 1.50 •
RM-SEI-2A-06 3.0 12 15.50 4.40 1.50 •
RM-SEI-3A-06 4.0 6 15.50 6.60 2.00 •
RM-SEI-3A-12 17.00 2.00 •
RM-SEI-4A-06 22.50 3.00 •
• Lead type of insert should be compatible with lead type of the tool • Available on request
(1) Insert size
336 ISCAR