Page 24 - HOLE MAKING CATALOG p383-544

ITS BOREIHSR-MIFR
Trepanning Cartridges Carrying
IC908MINCUT Inserts Mounted on the
BHR MB32-32X63 Boring Head

Designation DAXN(1) DAXX(2) CWN(3) CWX(4) OAL WB OAH Insert
21.0 1.50 2.20 32.00 23.00 17.50 MI.R 8
IHSR 8-21 MIFR8 8.0 34.0 2.00 3.00 27.00 22.00 17.80 MI.R 10 SR 14-297 T-8/5
IHSR 19-34 MIFR10 19.0 SR 34-506 T-9/5

(1) Minimum axial grooving diameter
(2) Maximum axial grooving diameter
(3) Minimum cutting width
(4) Maximum cutting width
For inserts, see pages: MIFR (406)
For holders, see pages: BHR MB (404)

MIFR 10 MIFR 8
PDY
MIFR CDX
Screw-Clamped Inserts DAXN-DAXX S1
for Internal Face Grooving
and Turning INSL WF
CW CDX

RE

Dimensions Recommended
Machining Data
Designation INSL CW CWTOL(1) RE RETOL(2) WF S1 DAXN(3) DAXX(4) CDX PDY
f face- f face-
MIFR 8-1.50-0.20 17.70 1.50 0.02 0.20 0.020 2.60 6.5 8.0 11.5 5.50 11.00 groove turn
11.00 (mm/rev) (mm/rev)
MIFR 8-1.60-0.80 17.70 1.60 0.02 0.80 0.020 2.60 6.5 8.0 12.1 5.50 11.00
11.00 • 0.02-0.10 0.02-0.06
MIFR 8-2.00-0.20 17.70 2.00 0.02 0.20 0.020 2.80 6.5 8.0 16.0 5.50 14.80 • 0.02-0.10 0.02-0.06
14.80 • 0.02-0.10 0.02-0.06
MIFR 8-2.20-0.20 17.70 2.20 0.02 0.20 0.020 2.90 6.5 8.0 21.0 5.50 14.80 • 0.02-0.10 0.02-0.06
14.80 • 0.02-0.10 0.02-0.06
MIFR 10-2.00-0.20 25.10 2.00 0.02 0.20 0.020 3.00 7.6 10.0 - 9.00 14.80 • 0.02-0.10 0.02-0.06
MIFR 10-2.00-1.00 25.10 2.00 0.02 1.00 0.020 3.00 7.6 10.0 - 9.00 14.80 • 0.02-0.10 0.02-0.06
MIFR 10-2.50-0.20 25.10 2.50 0.02 0.20 0.020 3.10 7.6 10.0 30.0 9.00 • 0.02-0.10 0.02-0.06
• 0.02-0.10 0.02-0.06
MIFR 10-2.50-1.25 25.10 2.50 0.02 1.25 0.020 3.30 7.6 10.0 - 9.00 • 0.02-0.10 0.02-0.06

MIFR 10-3.00-0.20 25.10 3.00 0.02 0.20 0.020 3.40 7.6 10.0 30.0 9.00
MIFR 10-3.00-1.50 25.10 3.00 0.02 1.50 0.020 3.30 7.6 10.0 34.0 9.00

• Recommended cutting speeds and feeds can increased by 20-30% for aluminum, and reduced by 20-30% for titanium and Inconel

(1) Cutting width tolerance (+/-)

(2) Corner radius tolerance (+/-)

(3) Minimum axial grooving diameter

(4) Maximum axial grooving diameter

For tools, see pages: IHSR-MIFR (406)

406 ISCAR