Page 29 - HOLE MAKING CATALOG p383-544

CR SOMT OAL ITS BORE
Boring Cartridge with a Square 86
Insert for BHR MB50-50X100 WF
Boring Head

Designation DCN(1) DCX(2) WF OAL MIID(3)
23.60 54.00 SO.T 09...
CR SOMT09 68-90-CP 68.00 90.00

• For user guide, see pages 403, 471-477

(1) Cutting diameter minimum

(2) Cutting diameter maximum

(3) Master insert identification

For inserts, see pages: SOGX/T-AL (115) • SOMT-DT (116) • SOMT-GF (115) • SOMT-HD (116)

For holders, see pages: BHR MB (404)

Spare Parts SR 34-506 SW4-SD BLD T09/M7-SW4

Designation
CR SOMT

BHC MB LF (assembly) 10 µm 40
Combi Rough and Fine Boring ADJRGR 2 µm
Heads with 10 µm Direct ADJRGR Bar Max
Diameter Adjustment and
2 µm by a Vernier Scale DCONMS 0.5 IHRF C
0.01 IHFF CDCN-DCX
Non. 0.002
IHSR C
LOCK

Designation DCONMS LF DCN(1) DCX(2) ADJRGR IH RPMX(3) kg

BHC MB25-25-57 25.00 56.50 28.0 36.0 0.50 IH...-C 10000 0.23
BHC MB32-32-71 32.00 71.00 36.0 46.0 0.45
40.00 90.00 46.0 60.0 0.50 IH...-C 10000 0.70
BHC MB40-40-90 50.00 87.00 60.0 75.0 1.21
63.00 109.00 75.0 95.0 1.00 IH...-C 8000 2.70
BHC MB50-50-87 80.00 130.00 95.0 120.0 4.41
1.00 IH...-C 8000
BHC MB63-63-109
BHC MB80-80-130 2.00 IH...-C 6000

2.00 IH...-C 5000

• The roughing head precedes the finishing head by 0.2 mm. Each head can be adjusted independently • Important: insert radius for combi rough and fine boring must be

the same size. • For spare parts, see page 468

(1) Cutting diameter minimum

(2) Cutting diameter maximum

(3) Maximum RPM

For tools, see pages: IHFF-C (413) • IHRF-C (413) • IHSR-C (413)

Graduated dial of 0.01 mm with
circular vernier of 0.002 mm

411