Page 32 - HOLE MAKING CATALOG p383-544

ITS BORE BHD MB LF (assembly) IHFF (E) IHRF IHRF CH IHRF BW BHEH 2 µm 40
Fine Boring Heads with Digital IHWF E
2 µm Direct Adjustment Bar Max
Diametric Display ADJRGLRPR

SR44 + DCN-DCX DCN-DCX
LOCK
DCONMS DCONWS Only for BHD
DCONWS MB50, MB63, MB80

BATTERY + BBH CW32
SR44 IHFF
LOCK IHAXF PICCO ACE BH

Designation LF DCONMS DCN(1) DCX(2) LPR ADJRGR DCONWS RPMX(3) kg

BHD MB32-32-83 83.00 32.00 35.0 51.0 71.5 3.00 - 20000 0.41
BHD MB40-40-90 0.73
90.00 40.00 48.0 64.0 76.0 4.00 - 20000 1.10
BHD MB50-50-60 2.20
80.00 50.00 2.5 110.0 61.0 5.00 16.00 20000 3.90
BHD MB63-63-89
BHD MB80-80-104 88.50 63.00 6.0 125.0 69.5 5.00 16.00 20000

104.00 80.00 6.0 200.0 84.5 5.00 16.00 20000

• For spare parts, see pages 435-436 • Note that a protruding reset button dictates the enlargement of the actual DCONMS by 2 mm in each size respectively.
This is important when the tool is being used for back-boring applications where you must clear any obstacles inside the machine/workpiece.
(1) Cutting diameter minimum
(2) Cutting diameter maximum
(3) Maximum RPM
For tools, see pages: IHAXF (432) • IHAXF-AVI (434) • IHAXF-E (434) • IHFF (436) • IHRF (436) • IHRF-BW (439) • IHRF-CH (439) • IHWF (436)

414 ISCAR