Page 39 - MILLING CATALOG p001-094
P. 39
DCX OAL ENDMILLS • SOLID CARBIDE • MULTI-MASTER
DC_2
CH45-PN06 DC DCONMS
Upper and Bottom
Chamfering Endmills Carrying 45˚ 45˚
Pentagonal Inserts APMX LU_2
APMX_2
LU
Designation DCX(1) DC_2 DC APMX APMX_2 DCONMS CICT(2) LU LU_2 OAL DMIN(3) kg
6.60 1.50 1.50 12.00 1 29.40 25.40 100.00 10.00
CH45-10-30-1-C12-PN06 11.70 8.45 11.40 1.50 1.50 16.00 2 29.40 25.40 110.00 17.00 0.00
CH45-17-60-2-C16-PN06 16.70 13.45 13.40 1.50 1.50 16.00 3 29.40 25.40 130.00 19.00 0.13
18.70 15.45 0.16
CH45-19-80-3-C16-PN06
(1) Cutting diameter maximum
(2) Number of inserts
(3) Minimum penetration diameter for back chamfering
For inserts, see pages: PNMT 0602-TN (540)
Spare Parts SR M2.5X5-T7-60 T-7/51
Designation
CH45-PN06
DCX OAL DRVS THSZMS
LF
DC_2
DC DCONMS
CH45-MM-PN06 45˚ 45˚
Upper and Bottom Chamfering APMX LF_2
Endmills with MULTI-MASTER
Threaded Adaptation APMX_2
Designation DCX(1) DC_2 DC APMX APMX_2 LF LF_2 OAL DCONMS THSZMS CICT(2) DRVS(3) DMIN(4) kg
10.00
CH45-10/.39-1-MMT05-PN06 11.70 8.45 6.60 1.50 1.50 13.00 9.00 19.75 7.60 T05 1 5.5 17.00 0.00
CH45-17/.67-2-MMT08-PN06 16.70 13.45 11.40 1.50 1.50 18.00 14.00 25.50 12.20 T08 2 10.0 19.00 0.02
T10 3 13.0 0.02
CH45-19/.75-3-MMT10-PN06 18.70 15.45 13.40 1.50 1.50 20.00 16.00 31.30 15.30
• Do not apply lubricant to the MULTI-MASTER threaded connection • For adaptation options, see page 44 • For user guide see pages 542-548
(1) Cutting diameter maximum
(2) Number of inserts
(3) Width across flats (wrench should be ordered separately)
(4) Minimum penetration diameter for back chamfering
For inserts, see pages: PNMT 0602-TN (540)
For holders, see pages: MM CAB (667) • MM CAB-T-T (91) • MM GRT (shanks) (86) • MM S-A (stepped shanks) (84) • MM S-A (straight shanks) (87)
• MM S-A-C# (86) • MM S-A-HSK (609) • MM S-A-N (85) • MM S-A-SK (90) • MM S-B (85° conical shanks) (87) • MM S-D (89° conical shanks) (88)
• MM S-ER (89) • MM S-ER-H (89) • MM TS-A (86)
Spare Parts SR M2.5X5-T7-60 T-7/51
Designation
CH45-MM-PN06
37
