Page 70 - MILLING CATALOG p001-094
P. 70
ENDMILLS • SOLID CARBIDE • MULTI-MASTER LF THSZMS Rd°
IC908KAPRDCONMS
IC903MM EFF
4, 6 Flute Solid Carbide DC
Heads for Milling at Very Fast
Feeds and Small D.O.C. Rg APMX
Dimensions Tough 1 Hard Recommended
Machining Data
Designation DC NOF(3) APMX THSZMS DCONMS LF RMPX°(4) KAPR(5) Rg(6) CSP(7) • fz
• (mm/t)
MM EFF080T3R1.62-4T05 8.00 4 0.40 T05 7.50 10.00 5.0 97.0 1.62 0 • 0.12-0.48
MM EFF100T4R2.01-4T06 10.00 4 0 • 0.16-0.57
MM EFF100T2R1.0-6T06H (1) 10.00 6 0.50 T06 9.50 13.00 5.0 97.0 2.01 1 • 0.16-0.47
MM EFF120T4R1.8-4T08H (1) 12.00 4 1 • 0.16-0.67
12.00 4 0.45 T06 9.50 10.00 3.0 97.0 1.00 0 • • 0.16-0.67
MM EFF120T4R2.47-4T08 12.00 6 1 • 0.16-0.54
MM EFF120T2R1.2-6T08H (1) 0.60 T08 11.50 16.50 5.0 97.0 1.80 • 0.16-0.67
• 0.16-0.67
0.60 T08 11.50 16.50 5.0 97.0 2.47 • 0.20-0.75
• 0.20-0.75
0.65 T08 11.50 12.50 3.0 97.0 1.20 • 0.20-0.65
0.20-0.90
MM EFF127T4R2.59-4T08 12.70 4 0.60 T08 12.20 16.50 5.0 97.0 2.59 0 0.20-0.80
12.70 6 1 0.25-1.00
MM EFF127T4R1.3-6T08H 16.00 4 0.70 T08 12.20 12.70 3.0 97.0 1.30 1 • 0.25-1.00
MM EFF160T5R2.2-4T10H (1) 16.00 4 0
16.00 6 0.80 T10 15.40 20.50 5.0 97.0 2.20 1 25
MM EFF160T5R3.25-4T10 1.00
MM EFF160T4R2.0-6T10H (1) 0.80 T10 15.40 20.50 5.0 97.0 3.25 1.00
1.00
1.05 T10 15.40 16.00 3.0 97.0 2.00 1.00
0.87
MM EFF200T6R4.02-4T12 20.00 4 1.00 T12 18.45 25.50 5.0 97.0 4.02 0 0.78
20.00 6 1 0.78
MM EFF200T5R2.2-6T12H (1) 25.00 6 1.25 T12 18.45 20.00 3.0 97.0 2.20 0 0.70
25.40 6 0 0.70
MM EFF250A7R3.1-6T15 (2) 1.20 T15 23.90 25.00 5.0 97.0 3.10 0.67
MM EFF254A7R3.1-6T15 (2) 0.62
1.20 T15 23.90 25.00 5.0 97.0 3.10 0.70
0.90
• For shanks, see pages 84-91 • For clamping keys (should be ordered separately), tightening torques and clamping instructions, see pages 91-92 0.80
0.55
• Do not apply lubricant to the threaded connection. • For user guide see pages 44, 177-184 0.52
0.25
(1) With a central coolant hole
(2) Cannot be used for plunging application
(3) Number of flutes
(4) Maximum ramping angle
(5) Tool cutting edge angle
(6) Radius for programming
(7) 0 - Without coolant supply, 1 - With coolant supply
Machining Recommendations Fz (mm/t) vs. Tool Diameter (mm)
10 12 16 20
VDI 3323 Material Group(1) Vc (m/min) ap AE 8 0.57 0.67 0.75 0.90
1 180 0.045xD 0.7xD 0.48 0.57 0.67 0.75 0.90
0.48 0.57 0.67 0.75 0.90
2 160 0.045xD 0.7xD 0.48 0.57 0.67 0.75 0.90
0.48 0.50 0.57 0.65 0.75
3 160 0.045xD 0.7xD 0.43 0.40 0.48 0.57 0.67
0.33 0.40 0.48 0.57 0.67
4 160 0.045xD 0.7xD 0.33 0.35 0.43 0.52 0.60
0.30 0.35 0.43 0.52 0.60
5 150 0.045xD 0.7xD 0.30 0.33 0.38 0.48 0.57
0.28 0.30 0.35 0.43 0.52
P 6 150 0.045xD 0.7xD 0.25 0.35 0.43 0.52 0.60
7 140 0.045xD 0.7xD 0.30 0.52 0.60 0.70 0.80
0.45 0.45 0.52 0.60 0.70
8 140 0.045xD 0.7xD 0.38 0.25 0.33 0.40 0.48
0.20 0.22 0.30 0.38 0.45
9 140 0.045xD 0.7xD 0.16 0.16 0.16 0.20 0.20
0.12
10 130 0.04xD 0.6xD
11 120 0.04xD 0.6xD
12, 13 120 0.04xD 0.6xD
K 15-16 180 Apmax 0.7xD
17-18
160 Apmax 0.7xD
38.1(2) 100 0.035xD 0.45xD
H 38.2(3) 80 0.03xD 0.3xD
39(4) 60 0.02xD 0.25xD
(1) ISCAR material group in accordance with VDI 3323 standard
(2) 45-49 HRc
(3) 50-55 HRc ap - Depth of cut
(4) 56-63 HRc AE - Width of cut
68 ISCAR
