Page 88 - MILLING CATALOG p001-094
P. 88
ENDMILLS • SOLID CARBIDE • MULTI-MASTER MM S-A-C# DCONMS RE5.0
MULTI-MASTER Threaded
Connection Shanks with THSZWS BD
a CAMFIX (ISO 26623-1)
Exchangeable Adaptation LU
LBX
Designation DCONMS THSZWS BD LPR LPR CDI(1) kg
35.00 0 0.00
MM S-A-H035-C3-T05 32.00 T05 7.60 35.00 LBX LU 0 0.12
40.00 20.0 15.00 0 0.13
MM S-A-H035-C3-T06 32.00 T06 9.25 40.00 20.0 15.00 0 0.15
45.00 25.0 20.00 0 0.16
MM S-A-H040-C3-T08 32.00 T08 11.60 45.00 25.0 20.00 0 0.00
45.00 30.0 25.00 0 0.00
MM S-A-H040-C3-T10 32.00 T10 15.30 50.00 25.0 20.00 0 0.00
55.00 25.0 20.00 0 0.00
MM S-A-H045-C3-T12 32.00 T12 18.30 55.00 30.0 25.00 0 0.35
60.00 35.0 30.00 0 0.00
MM S-A-H045-C4-T06 40.00 T06 9.25 60.00 35.0 30.00 0 0.48
60.00 40.0 35.00 0 0.58
MM S-A-H045-C4-T08 40.00 T08 11.60 65.00 40.0 35.00 0 0.00
65.00 40.0 35.00 0 0.00
MM S-A-H050-C4-T10 40.00 T10 15.30 70.00 43.0 38.00 0 0.00
43.0 38.00
MM S-A-H055-C4-T12 40.00 T12 18.30 40.0 35.00 kg
0.00
MM S-A-H055-C4-T15 40.00 T15 23.90 0.03
0.05
MM S-A-H060-C5-T10 50.00 T10 15.30 0.04
0.08
MM S-A-H060-C5-T12 50.00 T12 18.30 0.08
0.16
MM S-A-H060-C5-T15 50.00 T15 23.90 0.14
MM S-A-H065-C6-T12 63.00 T12 18.30
MM S-A-H065-C6-T15 63.00 T15 23.90
MM S-A-H070-C8-T15 80.00 T15 23.90
• Do not apply lubricant to the threaded connection • For adaptation options, see page 44
(1) 1 - Hole for data chip, 0 - Without hole for data chip
MM TS-A Detail B THSZWS MM TS-A-L...-H
Cylindrical Shanks Carrying BD OAL
Interchangeable Milling Heads BD DCONMS
30˚ B
Designation THSZWS DCONMS BD OAL Shank m.(1) RPMX(2) CSP(3)
0
MM TS-A-L070-C08-T04 T04 8.00 5.80 70.00 S - 0
0
MM TS-A-L070-C08-T05 T05 8.00 7.60 70.00 S 60000 1
0
MM TS-A-L080-C10-T06 T06 10.00 9.60 80.00 S 47400 1
0
MM TS-A-L080-C10-T06-H T06 10.00 9.60 80.00 S 46920 1
MM TS-A-L090-C12-T08 T08 12.00 11.60 90.00 S 43110
MM TS-A-L090-C12-T08-H T08 12.00 11.60 90.00 S 42780
MM TS-A-L100-C16-T10 T10 16.00 15.30 100.00 S 39420
MM TS-A-L100-C16-T10-H T10 16.00 15.30 100.00 S 39210
• Do not apply lubricant to the threaded connection
(1) S-steel, C-carbide
(2) The actual maximum RPM should be calculated by dividing the listed RPM max by the number of the head's flutes being used.
(3) 0 - Without coolant supply, 1 - With coolant supply
MM GRT (shanks) THSZWS MM GRT-...C-T08
Solid Carbide Cylindrical Shanks OAL/LF
Carrying Slitting and Grooving DCONMS
Interchangeable Milling Heads
Designation THSZWS DCONMS OAL Shank m.(1) CSP(2) kg
MM GRT-095-T06 T06 9.52 80.00 C 0 0.07
MM GRT-100-T06 T06 10.00 100.00 C 0 0.10
T08 12.00 100.00 C 1 0.12
MM GRT-120C-T08 T08 12.70 120.00 C 1 0.17
MM GRT-127C-T08
• MM GRT... shanks serve mainly for MM GRIT... slitting heads. When mounting other types of milling heads, do not exceed maximum specified depth of cut for the particular
milling head. Since the shank diameter is not relieved, it may touch a wall on the workpiece being machined.
• Use carbide shanks for groove milling heads and for applications requiring high rigidity and precision.
(1) C - Solid carbide
(2) 0 - Without coolant supply, 1 - With coolant supply
86 ISCAR