Page 83 - MILLING CATALOG p001-094
P. 83
MM ERA RE THSZMS IC08 IC08 Rd°
Interchangeable Solid Carbide DCONMS
Rough Milling Heads for DC FHA ENDMILLS • SOLID CARBIDE • MULTI-MASTERALUMINUM
Machining Aluminum at High Recommended
Metal Removal Rates APMX Machining Data
LF
Dimensions
Designation DC NOF(1) APMX RE THSZMS DCONMS LF FHA • fz
•
MM ERA080B05R0.2-3T05 8.00 3 5.00 0.20 T05 7.70 10.00 45.0 • (mm/t)
MM ERA100B06R0.2-3T06 10.00 3 • 0.03-0.15
12.00 3 6.00 0.20 T06 9.60 13.00 45.0 • 0.05-0.20
MM ERA120B08R0.2-3T08 • 0.07-0.22
8.00 0.20 T08 11.70 16.50 45.0 0.07-0.25
0.07-0.25
MM ERA160B10R0.2-3T10 16.00 3 10.00 0.20 T10 15.30 20.50 45.0 0.07-0.25
20.00 3 12.00 0.20
MM ERA200B12R0.2-3T12 25.00 3 19.00 0.20 T12 18.45 25.50 45.0
MM ERA250B19R0.2-3T15
T15 23.90 37.00 45.0
• For shanks, see pages 84-91 • For clamping keys (should be ordered separately), tightening torques and clamping instructions, see pages 91-92
• Do not apply lubricant to the threaded connection. • For user guide see pages 44, 177-184
(1) Number of flutes
MM EA DCh6 THSZMS Rd°
Interchangeable Solid Carbide DCONMS
Slot Drill Milling Heads for RE APMX ALUMINUM
Machining Aluminum LF FHA Recommended
Machining Data
Dimensions
Designation DC NOF(1) APMX RE THSZMS DCONMS LF FHA • fz
•
MM EA080B05R0.5-2T05 8.00 2 5.00 0.50 T05 7.70 10.00 45.0 • (mm/t)
MM EA080B05R0.5-3T05 8.00 3 5.00 0.50 T05 7.70 10.00 45.0 •
10.00 2 7.00 0.50 T06 9.60 13.00 45.0 • 0.03-0.09
MM EA100B07R0.5-2T06 • 0.03-0.09
• 0.03-0.10
MM EA100B07R1.0-2T06 10.00 2 7.00 1.00 T06 9.60 13.00 45.0 • 0.03-0.10
MM EA100B06R0.5-3T06 10.00 3 • 0.03-0.10
MM EA100B06R1.0-3T06 10.00 3 6.00 0.50 T06 9.60 13.00 45.0 • 0.03-0.10
MM EA120B09R0.5-2T08 12.00 2 • 0.04-0.11
MM EA120B09R1.0-2T08 12.00 2 6.00 1.00 T06 9.60 13.00 45.0 • 0.04-0.11
• 0.04-0.11
9.00 0.50 T08 11.70 16.50 45.0 • 0.04-0.11
• 0.04-0.11
9.00 1.00 T08 11.70 16.50 45.0 • 0.05-0.13
• 0.05-0.13
MM EA120B08R0.5-3T08 12.00 3 8.00 0.50 T08 11.70 16.50 45.0 • 0.05-0.13
MM EA120B08R1.0-3T08 12.00 3 8.00 1.00 • 0.05-0.13
MM EA120B08R3.0-3T08 12.00 3 8.00 3.00 T08 11.70 16.50 45.0 • 0.05-0.13
MM EA160B10R000-3T10 16.00 3 10.00 0.00 • 0.05-0.13
MM EA160B10R1.0-3T10 16.00 3 10.00 1.00 T08 11.70 16.50 45.0 0.05-0.13
0.05-0.13
T10 15.30 20.50 45.0 0.05-0.13
0.05-0.13
T10 15.30 20.50 45.0
MM EA160B10R2.0-3T10 16.00 3 10.00 2.00 T10 15.30 20.50 45.0
MM EA160B10R3.0-3T10 16.00 3 10.00 3.00
MM EA160B10R4.0-3T10 16.00 3 10.00 4.00 T10 15.30 20.50 45.0
MM EA200B12R0.5-3T12 20.00 3 12.00 0.50
MM EA200B12R1.0-3T12 20.00 3 12.00 1.00 T10 15.30 20.50 45.0
T12 18.45 25.50 45.0
T12 18.45 25.50 45.0
MM EA200B12R2.0-3T12 20.00 3 12.00 2.00 T12 18.45 25.50 45.0
20.00 3 12.00 3.00
MM EA200B12R3.0-3T12 20.00 3 12.00 4.00 T12 18.45 25.50 45.0
MM EA200B12R4.0-3T12
T12 18.45 25.50 45.0
• For shanks, see pages 84-91 • For clamping keys (should be ordered separately), tightening torques and clamping instructions, see pages 91-92
• Do not apply lubricant to the threaded connection.
(1) Number of flutes
81
