Page 103 - MILLING CATALOG p319-550
P. 103
MTSR M.I. S.P. DC DCONMS THREAD MILLING TOOLS
Indexable Multi-Insert Threading PDX
Endmills with Weldon Shanks
for Single Point Inserts
OAL
Designation DC PDX NOF(1) DCONMS OAL Shank(2) Shank m.(3) Insert kg
WS MT3 11..D
MTSR 0023 Q11 23.50 1.0 3 20.00 190.00 WS MT3 16..D 0.41 SR M2.6-L6.7-S11 T-8/5
MTSR 0031 R16 31.00 1.8 0.76 SR 5-40-L9.7-S16S
3 25.00 225.00
• Minimum bore should be one-third larger than D • For user guide, see pages 435-442
(1) Number of flutes
(2) W-Weldon
(3) S-Steel shanks
For inserts, see pages: MT3-55D (434) • MT3-60D (433)
MTSR M.I. S.P.-U DC DCONMS
Indexable Multi-Insert Threading PDX
Endmills with Weldon Shanks
for Single Point U-Type Inserts
LU
OAL
Designation DC PDX NOF(1) DCONMS LU OAL Shank(2) Shank m.(3) Insert kg
W S MT3 11U..D
MTSR 0023 M11U 23.00 5.0 3 25.00 88.0 150.00 W S MT3 16U..D 0.32 SR M2.6-L6.7-S11 T-8/5
MTSR 0035 R16U 35.50 7.6 0.95 SR 5-40-L9.7-S16S
4 32.00 155.0 220.00
• Minimum bore should be one-third larger than D • For user guide, see pages 435-442
(1) Number of flutes
(2) W-Weldon
(3) S-Steel shanks
For inserts, see pages: MT3-U55D (434) • MT3-U60D (434)
MTET Single Point
Indexable Threading Endmills
OAL
with Cylindrical Shanks
for Single Point Inserts
DC DCONMS
Dimensions
Designation TPN(2) TPX(3) TPIX(4) TPIN(5) Shank kg fz
DC DCONMS OAL Shank(6) m.(7) Insert CSP(8) (mm/rev)
MTET D7.0-1-C5C-06 0.500 1.250 48.00 20.00 7.00 5.00 63.00 C C 06IR/EL 0 0.06 0.05-0.15
C C 08IR/EL 1 0.06 0.05-0.15
MTET D8.8-1-C6C-08 0.500 1.750 48.00 14.00 8.80 6.00 100.00 C C 11IR/EL 1 0.13 0.05-0.15
MTET D13.2-1-C10C-11 (1) 0.500 2.000 48.00 11.00 13.20 10.00 150.00
• For user guide, see pages 435-442 • For inserts, refer to ISCAR Turning and Threading Tools catalog • Tool cutting diameter should not exceed 2/3 of thread bore diameter
(1) For internal threading use internal R.H insert, for external threading use external L.H insert
(2) Thread pitch minimum (mm)
(3) Thread pitch maximum (mm)
(4) Threads per inch maximum
(5) Threads per inch minimum
(6) C-Cylindrical
(7) Shank material C-carbide
(8) 0 - Without coolant supply, 1 - With coolant supply
Spare Parts SR 14-552 T-6/5
SR 14-558-S T-6/5
Designation SR M2.6-L6.7-S11 T-8/5
MTET D7.0-1-C5C-06
MTET D8.8-1-C6C-08
MTET D13.2-1-C10C-11
419
