Page 52 - TURNING CATALOG p121-254
P. 52
ISOTURN INSERTS 60° 22°MAX
TNMM-NR 91º 93º 91º
Single-Sided Triangular Inserts
with a Special Chipformer L 95º 91º 55°
for Heavy Machining IC MAX
60º
RE S
Dimensions Recommended Machining Data
IC8150 ap f
(mm/rev)
Designation L IC S RE (mm) 0.30-0.50
1.60 • 2.50-6.00
TNMM 220416-NR 22.00 12.70 4.76
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
For tools, see pages: C#-DTGNR/L (44) • DTGNR/L (44) • MTENN-W (38) • MTJNR/L-W (38) • PTFNR/L (37) • PTGNR/L (35) • PTGNR/L-X (36)
• S-MTLNR/L-W (109) • S-PTFNR/L (109)
60° 22°MAX
TNMA 91º 93º 91º
Double-Sided Triangular
Inserts with no Chipformer for L 95º 91º 55°
Short Chipping Materials MAX
60º
RE S
IC
Tough 1 Hard
Dimensions Recommended Machining Data
Designation L IC S RE IC20 ap f
IC5010
TNMA 160404 IC428 (mm) (mm/rev)
TNMA 160408 IC5005 0.50-3.00 0.05-0.21
TNMA 160412 1.00-4.00 0.05-0.25
TNMA 160416 16.50 9.52 4.76 0.40 ••• 1.50-4.50 0.10-0.29
TNMA 220408 0.80 • • • • 1.50-4.50 0.10-0.40
TNMA 220412 16.50 9.52 4.76 ••• 1.50-5.00 0.05-0.33
TNMA 220416 1.50-5.00 0.10-0.33
16.50 9.52 4.76 1.20 • 1.50-5.00 0.10-0.37
16.50 9.52 4.76 1.60
0.80 • ••
22.00 12.70 4.76 •••
22.00 12.70 4.76 1.20 •
22.00 12.70 4.76 1.60
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
For tools, see pages: A-PTFNR/L-X/G (108) • C#-DTGNR/L (44) • DTGNR/L (44) • MTENN-W (38) • MTJNR/L-W (38) • PTFNR/L (37)
• PTGNR/L (35) • PTGNR/L-X (36) • PTGNR/L-X-JHP (36) • PTGNR/L-X-JHP-MC (37) • S-MTLNR/L-W (109) • S-PTFNR/L (109)
RNMG S
Double-Sided Round IC D1
Negative Insert for Medium
and Rough Profiling
Dimensions Tough 1 Hard Recommended Machining Data
•• ap f
Designation IC S D1 IC8250 (mm) (mm/rev)
5.15 IC8150 2.00-5.00 0.30-0.60
RNMG 120400 12.70 4.76
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
172 ISCAR
