Page 102 - TURNING CATALOG p255-458
P. 102
GROOVE-TURN GHIC-85 DCONMS H
Boring Bars for Internal
Grooving and Turning HF
Blades, DMIN=85 mm OAL
Designation H DCONMS OAL HF
260.00
GHIC 40-85 32.0 40.00 300.00 18.0 SR M6X16 DIN912 HW 5.0
GHIC 50-85 32.0 50.00
23.0 SR M6X16 DIN912 HW 5.0
• For both right and left hand applications
For tools, see pages: CGHN 32-DGM (358) • CGHN 32-M (357)
CGHN 26-M CWN-CWX CDX
Internal Grooving and Turning
Blades for GHIC...-70 Bars 14.5 HF H DMIN
25° OAL WB WFN-WFX
35° 150°
OHN-OHX
Designation CWN(1) CWX(2) WB DMIN WFN(3) OHN(4) WFX(5) OHX(6) HF OAL H
26.0
CGHN 26-3M 2.80 4.00 2.40 70.00 40.0 13.5 46.5 20.0 21.4 63.00 26.0
CGHN 26-4M 3.60 4.50 3.20 70.00 40.0 13.5 46.5 20.0 21.4 63.00 26.0
4.40 6.40 4.00 70.00 40.0 13.5 46.5 20.0 21.4 63.00
CGHN 26-5M
• Grooving depth (CDX) varies in conformance with blade's overhang (WFN-WFX and OHN-OHX) and depends on the bore diameter (D)
• CGHN 26...-M can be modified from external double-sided CGHN blades • When TIP inserts are used the seat needs to be modified to ensure clearance
• For user guide, see pages 419-428, 432-436
(1) Minimum cutting width
(2) Maximum cutting width
(3) Adjustable extension
(4) Minimum overhang for adjustable extension
(5) Adjustable extension
(6) Maximum overhang for adjustable extension
For inserts, see pages: GIMF (288) • GIMY (288) • GIMN (289) • GIMY (full radius) (290) • GIMY-F (291) • GIF-E (W=4-6) (292)
• GIF-E (W=4-6 full radius) (294) • GIP-E (293) • GIP-E (full radius) (294) • GIP (297) • GIP (full radius) (296) • GIF (297)
• GIF (full radius) (298) • GIA-K (W=3-6) (298) • GITM (299) • GITM (full radius) (299) • GIPY (300) • GIPA (full radius W=3-6) (301)
• GIPA (W=3-6) (300) • GIM-C (521) • GIM-J (522) • GIM-J-RA/LA (522) • GIM-UT (524) • GIM-UT-RA/LA (524) • GIM-W (523) • GIM-W-RA/LA (523)
• GIMT (287) • GIPM-A46 / GIP-1250 (375) • TIP-MT (647) • TIP-WT (641)
For holders, see pages: C#-GHIC (629) • GHIC-70 (355)
Internal Grooving Capacity for CGHN 26 Blades
19Grooving Depth CDX (mm) OH=20 Example:
18 Overhang OH, (mm)OH=19
17 OH=18 For grooving depth CDX=15.5 mm
16 OH=17 and grooving width=5 mm
15 OH=16 in bore øD=100, use blade
14 OH=15 CGHN 26-5M and adjust overhang to OH=18 mm.
13 OH=14
12 OH=13 CGHN 26-...M
11
10 CDX WFN-WFX 250
70 D
OHN-OHX(1)
100 150 200
Bore Diameter D (mm)
356 ISCAR