Page 103 - TURNING CATALOG p255-458
P. 103
Grooving Depth CDX (mm) CWN-CWX CDX
Overhang OH (mm)
CGHN 32-M 17.5 HF H DMIN
GROOVE-TURNInternal Grooving and25°
Turning Blades WFN-WFX
15° WB OHN-OHX
150°
75
OAL CGHN 32-...M blade can be modified from external blades CGHN 32-...D
Designation CWN(1) CWX(2) WB WFN(3) WFX(4) OHN(5) OHX(6) HF OAL H DMIN
CGHN 32-3M 2.80 4.00 2.40 44.0 48.0 15.0 19.0 24.8 82.00 32.0 85.00
CGHN 32-4M 3.60 5.00 3.20 44.0 50.0 15.0 21.0 24.8 82.00 32.0 85.00
4.40 6.40 4.00 44.0 55.0 15.0 26.0 24.8 82.00 32.0 85.00
CGHN 32-5M 5.60 6.40 5.20 44.0 55.0 15.0 26.0 24.8 82.00 32.0 85.00
CGHN 32-6M
• WFN-WFX and OHN-OHX are the blade's extension range • Grooving depth (CDX) varies in conformance with blade's overhang (OHN-OHX) and depends on the bore
diameter(D). For grooving capacity, see graph
• When using TIP inserts, the toolholder seat needs to be modified • For user guide, see pages 419-428, 432-436
(1) Minimum cutting width
(2) Maximum cutting width
(3) Adjustable extension
(4) Adjustable extension
(5) Minimum overhang for adjustable extension
(6) Maximum overhang for adjustable extension
For inserts, see pages: GIA-K (W=3-6) (298) • GIF (297) • GIF (full radius) (298) • GIF-E (W=4-6 full radius) (294) • GIF-E (W=4-6) (292)
• GIM-C (521) • GIM-J (522) • GIM-J-RA/LA (522) • GIM-UT (524) • GIM-UT-RA/LA (524) • GIM-W (523) • GIM-W-RA/LA (523) • GIMF (288)
• GIMN (289) • GIMT (287) • GIMY (288) • GIMY (full radius) (290) • GIMY-F (291) • GIP (297) • GIP (full radius) (296) • GIP-E (293)
• GIP-E (full radius) (294) • GIPA (full radius W=3-6) (301) • GIPA (W=3-6) (300) • GIPM-A46 / GIP-1250 (375) • GIPY (300)
• GITM (299) • GITM (full radius) (299) • TIP-MT (647) • TIP-WT (641)
For holders, see pages: GHIC-85 (356)
Internal Machining Grooving Capacity for CGHN 32 Blades
T max OH=30 Example:
27
26 OH=26 For grooving depth CDX=16 and grooving width= 4
OH=24 in bore øD=180, use blade CGHN-32-4M
25 OH=21 and adjust overhang to OH=21 mm.
24 OH=19
CGHN 32-...M/DGM
23 OH=15
22 CDX WFN-WFX
21 D
20 OHN-OHX(1)
19
18 100 150 200 250 ØD
17
16 Bore Diameter D (mm)
15
14
13
12
11
10
9
8
7
6
5
4
3
80
357