Page 109 - TURNING CATALOG p255-458

OAL=LF SCHR 0810-22BF TOOLS FOR MINIATURE PARTS

SCHR/L-22BF H CDX HBH HBL
Grooving and Turning B
Tools with Back and Front CWN-CWX
Clamping for Swiss-Type
and Automatic Machines

Left-hand shown

Designation H B OAL HBH HBL CDX(1) CWN(2) CWX(3)

SCHR/L 0810-22BF 8.0 10.0 125.00 2.0 24.0 8.00 0.50 2.50 SR M4X0.7-19425 T-8/5
SCHR/L 10-22BF - 8.00 0.50 2.50 SR M4X0.7-19425 T-8/5
10.0 10.0 125.00 - - 8.00 0.50 2.50 SR M4X0.7-19425 T-8/5
SCHR/L 12-22BF - 8.00 0.50 2.50 SR M4X0.7-19425 T-8/5
SCHR/L 16-22BF 12.0 12.0 125.00 -

16.0 16.0 125.00 -

(1) See insert dimensions
(2) Minimum cutting width
(3) Maximum cutting width
For inserts, see pages: SCIR-22-MTR-ISO (658) • SCIR/L-22-AD (367) • SCIR/L-22-AR/AL (367) • SCIR/L-22-BR/BL/BRA/BLA (365)
• SCIR/L-22-ER/EL/ERA/ELA (366) • SCIR/L-22-MTR/MTL (646) • SCIR/L-22-N/R/L (368) • SCIR/L-22-NP (369) • SCIR/L-22-NX (369)

SCHR/L-22BF-JHP LH OAL=LF
Grooving and Turning Tools 5.5
with High-Pressure Coolant H
Channels for Swiss-Type CWN-CWX UNF 5/16-24 typx3 Bar Max
and Automatic Machines
B Right-hand shown

50 70

Designation H B OAL LH CWN(1) CWX(2) CDX(3)

SCHR/L 10-22BF-JHP 10.0 10.0 125.00 20.7 0.50 2.50 8.00 SR M4X0.7-19425 T-8/5 SR 5/16UNF TL360 HW 5/32"
SCHR/L 12-22BF-JHP 12.0 12.0 125.00 20.7 0.50 2.50 8.00 SR M4X0.7-19425 T-8/5 SR 5/16UNF TL360 HW 5/32"
T-8/5 SR 5/16UNF TL360 HW 5/32"
SCHR/L 16-22BF-JHP 16.0 16.0 125.00 20.7 0.50 2.50 8.00 SR M4X0.7-19425

• Note: Coolant ports of the left-hand tools are in the same position as those of the right-hand tools
(1) Minimum cutting width
(2) Maximum cutting width
(3) See insert dimensions
For inserts, see pages: SCIR-22-MTR-ISO (658) • SCIR/L-22-AD (367) • SCIR/L-22-AR/AL (367) • SCIR/L-22-BR/BL/BRA/BLA (365)
• SCIR/L-22-ER/EL/ERA/ELA (366) • SCIR/L-22-MTR/MTL (646) • SCIR/L-22-N/R/L (368) • SCIR/L-22-NP (369) • SCIR/L-22-NX (369)

Flow Rate vs. Pressure 70 Bar 100 Bar 140 Bar
Flow Rate (liters/min) Flow Rate (liters/min) Flow Rate (liters/min)
Designation
SCHR/L 10-22BF-JHP 1-3 2-4 3-5
SCHR/L 12-22BF-JHP 3-5 4-6 5-7
SCHR/L 16-22BF-JHP 6-8 7-9 8-10

B

Y-SCHR-22BF HF HH OAH
Y Axis Tools for Swiss Type Dmax LH LF H
Machines - Back or Front
Clamped Inserts for Grooving OAL WF
and Turning Operations

Designation H B HH LH HF WF OAH LF OAL D max
25.0 (1)
Y-SCHR 12-22BF 12.0 12.0 13.0 20.0 12.0 9.00 25.00 100.00 105.50 38.0 (1) SR M4X0.7-19425 T-8/5
Y-SCHR 16-22BF SR M4X0.7-19425 T-8/5
16.0 16.0 9.0 20.0 16.0 13.00 25.00 125.00 130.50

(1) for grooving
For inserts, see pages: SCIR-22-MTR-ISO (658) • SCIR/L-22-AD (367) • SCIR/L-22-AR/AL (367) • SCIR/L-22-BR/BL/BRA/BLA (365)
• SCIR/L-22-ER/EL/ERA/ELA (366) • SCIR/L-22-MTR/MTL (646) • SCIR/L-22-N/R/L (368) • SCIR/L-22-NP (369) • SCIR/L-22-NX (369)

363