Page 113 - TURNING CATALOG p255-458
P. 113
22.0 3.0 Workpiece TOOLS FOR MINIATURE PARTS
7.0 Tc
SCIR/L-22-AD 2xGAN
Turning Inserts with a
Frontal Relief Angle
CW Tc
RE CDX
Dimensions Tough 1 Hard Recommended Machining Data
IC1008 ap f turn f groove
IC07 (mm/rev)
Designation CW RE Tc GAN CDX(1) IC1007 (mm) (mm/rev) 0.01-0.06
SCIR/L 22-AD08-24K8 2.40 0.08 8.0 8.0 5.50 ••• 0.12-3.80 0.01-0.15
(1) Cutting depth maximum
For tools, see pages: NQCH-SCHR/L-BF-JHP (364) • NQCH-Y-SCHR-BF-JHP (364) • SCHR/L-22BF (363) • SCHR/L-22BF-JHP (363) • Y-SCHR-22BF (363)
• Y-SCHR-22BF-JHP (364)
22.0 3.0 Workpiece
Tc
SCIR/L-22-AR/AL GAN
Turning Inserts with a
Frontal Relief Angle 7.0
CDX Tc
RE PSIRR
Dimensions Tough 1 Hard Left-hand shown
Recommended
Machining Data
IC1008 ap f turn
IC07
Designation RE Tc PSIRL PSIRR GAN CDX(1) IC1007 (mm) (mm/rev)
0.01-0.15
SCIL 22-AL00-25K16 0.00 8.0 8.0 - 16.0 3.80 ••• 0.05-3.80 0.01-0.15
••• 0.01-0.15
SCIR 22-AR00-25K16 0.00 8.0 - 8.0 16.0 3.80 ••• 0.05-3.80 0.01-0.15
SCIL 22-AL10-25K8 0.10 8.0 12.0 - 8.0 3.80 ••• 0.12-3.80
SCIR 22-AR10-25K8 0.10 8.0 - 12.0 8.0 3.80 0.12-3.80
(1) Cutting depth maximum
For tools, see pages: NQCH-SCHR/L-BF-JHP (364) • NQCH-Y-SCHR-BF-JHP (364) • SCHR/L-22BF (363) • SCHR/L-22BF-JHP (363) • Y-SCHR-22BF (363)
• Y-SCHR-22BF-JHP (364)
367
