Page 67 - TURNING CATALOG p255-458

±0.04 24 IC908

PENTA 24N-C (full radius) CW RE 2 GROOVE-TURN
Full Radius Grooving Inserts 2
with 5 Cutting Edges for Hard
Materials and Tough Applications

CDX(2)

Dimensions Recommended
Machining Data

Designation CW RE CWTOL(1) CDX(2) f groove
0.79 0.02 3.00 •
PENTA 24N157C079 1.57 1.00 0.02 3.00 • (mm/rev)
PENTA 24N200C100 2.00 1.20 0.02 5.00 • 0.04-0.12
PENTA 24N239C120 2.39 1.50 0.02 6.20 • 0.04-0.16
PENTA 24N300C150 3.00 0.06-0.18
0.10-0.25

• Recessing is possible only with 2.39 mm and wider inserts • For cutting speed recommendations and user guide, see pages 419-428, 432-436

(1) Cutting width tolerance (+/-)

(2) For grooving depth relative to part diameter, see page 322

For tools, see pages: PCAD RE/LE-JHP (499) • PCADR/L (316) • PCADR/L-JHP (317) • PCHBR/L (318) • PCHPR/L (316) • PCHR/L-24 (312)

• PCHR/L-24-JHP (313) • PCHR/L-24-JHP-MC (313)

PENTA 24N-PF/P ±0.04 CDX(3) 24
Pentagonal Inserts with a High CW RE
Positive Flat Rake for Parting
and Precision Grooving GAN
7º

4

Dimensions Tough 1 Hard Recommended
Machining Data

Designation CW RE CWTOL(1) RETOL(2) CDX(3) GAN IC1008 f groove
IC908
IC30N (mm/rev)
0.01-0.04
PENTA 24N050PF005 0.50 0.05 0.02 0.020 2.50 6.0 • 0.02-0.05
• 0.02-0.05
PENTA 24N075PF005 0.75 0.05 0.02 0.020 2.50 6.0 • 0.02-0.05
• 0.03-0.06
PENTA 24N095PF005 0.95 0.05 0.02 0.020 4.00 6.0 • 0.03-0.06
12.0 • • 0.03-0.06
PENTA 24N100P005 1.00 0.05 0.02 0.020 3.50 • • 0.02-0.07
• 0.03-0.09
PENTA 24N100PF010 1.00 0.10 0.02 0.020 4.00 6.0 • •
• 0.02-0.08
PENTA 24N125PF020 1.25 0.20 0.02 0.020 5.00 6.0 • •
• • 0.03-0.10
PENTA 24N145PF020 1.45 0.20 0.02 0.020 6.20 6.0 • • 0.02-0.08
12.0 • • • 0.04-0.10
PENTA 24N150P005 1.50 0.05 0.02 0.020 5.00 • 0.04-0.14
• 0.04-0.14
PENTA 24N150PF020 1.50 0.20 0.02 0.030 6.00 6.0 0.04-0.14
0.04-0.14
PENTA 24N175PF020 1.75 0.20 0.02 0.030 6.20 6.0 0.04-0.15
0.04-0.16
PENTA 24N185PF020 1.85 0.20 0.02 0.030 6.00 6.0 0.04-0.16
12.0 •
PENTA 24N200P005 2.00 0.05 0.02 0.020 6.00

PENTA 24N200PF020 2.00 0.20 0.02 0.030 6.50 6.0

PENTA 24N230PF020 2.30 0.20 0.02 0.030 6.20 6.0

PENTA 24N239PF015 2.39 0.15 0.02 0.030 6.50 6.0

PENTA 24N250PF020 2.50 0.20 0.02 0.030 6.50 6.0
6.0
PENTA 24N300PF020 3.00 0.20 0.02 0.030 6.50 6.0
6.0
PENTA 24N300PF030 3.00 0.30 0.02 0.030 6.20 6.0

PENTA 24N400PF020 4.00 0.20 0.02 0.030 6.50

PENTA 24N400PF040 4.00 0.40 0.02 0.030 6.20

• For cutting speed recommendations and user guide, see pages 419-428, 432-436

(1) Cutting width tolerance (+/-)

(2) Corner radius tolerance (+/-)

(3) For grooving and parting depths relative to part diameter, see page 322

For tools, see pages: PCAD RE/LE-JHP (499) • PCADR/L (316) • PCADR/L-JHP (317) • PCHBR/L (318) • PCHPR/L (316) • PCHR/L-24 (312)

• PCHR/L-24-JHP (313) • PCHR/L-24-JHP-MC (313)

321