Page 29 - ISCAR_ARTICLE_2020
P. 29

Exchangeable Heads
        ISCAR’s families of rotating assembled tools with
        exchangeable heads - MULTI-MASTER mills and
        SUMOCHAM drills - enable substantial decreases in
        downtime, a critical parameter particularly for small
        volume and individual manufacturing.
        Face contact between a head and a tool body
        ensures that the head overhang is within strict
        tolerance limits, resulting in high dimensional
        repeatability of the assembly.


        Turn Milling
        Turn milling is a good option for machining heavy
        rotary parts. In turning, the cutting speed is a function
        of rotating velocity. If the main drive of a machine
        tool does not allow rotation of large masses with the
        required velocity, due to limitations of its working
        characteristics, then the cutting speed is far from the
        optimal range and turning performance will be low.
        When turning large eccentric parts like crankshafts,
        off-center masses of the parts cause unbalanced
        forces that adversely affect performance. Turn milling
        features low rotary velocity of a part, which prevents
        this negative effect.

        The majority of ISCAR’s indexable face milling cutters
        are suitable for turn milling. The success of their
        application depends on cutter positioning with respect
        to the machined part, choosing optimal geometry of
        inserts, and cutting data calculation.



           Most of ISCAR’s indexable
             face milling cutters can

             be used for turn milling,

             depending on the cutter

            position in relation to the
             machined part, optimal

         insert geometry, and cutting

                   data calculations














                                                                                                       ISCAR     29
   24   25   26   27   28   29   30   31   32   33   34