Page 47 - ISCAR_ARTICLE_2020

High Speed Milling
Expanding the range of products intended for high The MULTI-MASTER, with its rich variety of heads,
speed milling, ISCAR introduced multi-flute solid carbide shanks, reducers and extensions, enables thousands
endmills in 2-20 mm (.250-.750 in) diameters for high of possible tool configurations. The MULTI-MASTER
speed finish and semi-finish milling. The endmills are tools wholly meet the requirements of the important
produced from the ultra-fine IC902 carbide grade, “no setup time” principle, as replacing a worn head
which was developed to machine hard materials, and does not require additional setup operations.
have a cutting-length-to-diameter ratio of up to 6. They The head can be changed without removing a tool from
are operated at rotational speeds up to 20000 rpm. a machine, which significantly decreases downtime.

MULTI-MASTER Options Advances in industrial branches such as the automotive
ISCAR’s MULTI-MASTER family of assembled tools industry have had a major impact on die and mold
with exchangeable cutting heads is a good choice for needs, leading to new levels in cutting tool demands
die and mold making. The MULTI-MASTER head is that should be heeded by tool manufacturers.
suitable for mounting on different tool bodies (shanks),
and the shank can carry different heads. The heads are
varied in shape, cutting geometry and sizes and are
designed for machining 3D surfaces and shoulders,
faces and slots, chamfers and holes. The cylindrical INDEXABLE SOLID CARBIDE LINE
and taper-neck shanks feature different dimensions for
a broad-ranging overhang; their design options ensure
clamping in toolholders, collet chucks or in a machine
tool spindle directly.

No Setup
Time

ISCAR 47