Page 117 - HOLE_MAKING_CATALOG_INCH_2022_P1-P186

OAL
DCM-3D (7.5-25.9 mm) LU LPR LS
Drill Body with Exchangeable D = 7.5 - 21.9 DCN-DCX DF
Heads, Internal Coolant DCONMS
Holes and One Flat Shank. PL
Drilling Depth: 3xD
D = 22 - 25.9

M E T R I C INDEXABLE DRILLS
Designation DCN (1) DCX (2) DCONMS DF LU LPR PL LS OAL SSC (3)
DCM 075-022-12A-3D 7.50 7.90 12.00 16.00 22.0 33.1 1.360 45.0 78.10 8.0 K DCM- 8
DCM 080-024-12A-3D 8.00 8.40 12.00 16.00 24.0 35.0 1.460 45.0 80.00 8.0 K DCM- 8
DCM 085-025-12A-3D 8.50 8.90 12.00 16.00 25.0 37.0 1.550 45.0 82.00 8.0 K DCM- 8
DCM 090-027-12A-3D 9.00 9.40 12.00 16.00 27.0 39.1 1.640 45.0 84.10 9.0 K DCM- 9
DCM 095-028-12A-3D 9.50 9.90 12.00 16.00 28.0 41.1 1.730 45.0 86.10 9.0 K DCM- 9
DCM 100-030-16A-3D 10.00 10.40 16.00 20.00 30.0 44.0 1.820 48.0 92.00 10.0 K DCM-10
DCM 105-031-16A-3D 10.50 10.90 16.00 20.00 31.0 46.0 1.910 48.0 94.00 10.0 K DCM-10
DCM 110-033-16A-3D 11.00 11.40 16.00 20.00 33.0 48.1 2.000 48.0 96.10 11.0 K DCM-11
DCM 115-034-16A-3D 11.50 11.90 16.00 20.00 34.0 50.0 2.090 48.0 98.00 11.0 K DCM-11
DCM 120-036-16A-3D 12.00 12.40 16.00 20.00 36.0 52.2 2.180 48.0 100.20 12.0 K DCM-12
DCM 125-037-16A-3D 12.50 12.90 16.00 20.00 37.0 53.8 2.270 48.0 101.80 12.0 K DCM-12
DCM 130-039-16A-3D 13.00 13.40 16.00 20.00 39.0 56.5 2.370 48.0 104.50 13.0 K DCM-13
DCM 135-040-16A-3D 13.50 13.90 16.00 20.00 40.0 58.5 2.460 48.0 106.50 13.0 K DCM-13
DCM 140-042-16A-3D 14.00 14.40 16.00 20.00 42.0 61.2 2.550 48.0 109.20 14.0 K DCM-14
DCM 145-043-16A-3D 14.50 14.90 16.00 20.00 43.0 64.8 2.640 48.0 112.80 14.0 K DCM-14
DCM 150-045-20A-3D 15.00 15.90 20.00 25.00 45.0 65.7 2.730 50.0 115.70 15.0 K DCM-15
DCM 160-048-20A-3D 16.00 16.90 20.00 25.00 48.0 70.0 2.910 50.0 120.00 16.0 K DCM-16
DCM 170-051-20A-3D 17.00 17.90 20.00 25.00 51.0 73.5 3.090 50.0 123.50 17.0 K DCM-17
DCM 180-054-25A-3D 18.00 18.90 25.00 32.00 54.0 78.3 3.280 56.0 134.30 18.0 K DCM-18
DCM 190-057-25A-3D 19.00 19.90 25.00 32.00 57.0 82.3 3.460 56.0 138.30 19.0 K DCM-19
DCM 200-060-25A-3D 20.00 20.90 25.00 32.00 60.0 87.0 3.640 56.0 143.00 20.0 K DCM-20
DCM 210-063-25A-3D 21.00 21.90 25.00 32.00 63.0 90.8 3.820 56.0 146.80 21.0 K DCM-21
DCM 220-066-25A-3D 22.00 22.90 25.00 32.00 66.0 95.1 4.000 56.0 151.10 22.0 K DCM-22
DCM 230-069-25A-3D 23.00 23.90 25.00 32.00 69.0 99.5 4.190 56.0 155.50 23.0 K DCM-23
DCM 240-072-25A-3D 24.00 24.90 25.00 32.00 72.0 103.6 4.370 56.0 159.60 24.0 K DCM-24
DCM 250-075-25A-3D 25.00 25.90 25.00 32.00 75.0 109.0 4.550 56.0 165.00 25.0 K DCM-25
• Do not mount smaller drilling heads other than the specified range of the drill body • Drill tolerance: k7 • For user guide and cutting conditions, see pages 125-129
(1) Cutting diameter minimum
(2) Cutting diameter maximum
(3) Seat size code
For inserts, see pages: IDI-SG (118) • IDI-SK (122)

115