Page 25 - HOLE_MAKING_CATALOG_INCH_2022_P1-P186
P. 25

DCN C-8D                                                     OAL
             Drill Body with Exchangeable      PL              LU                         LS
             Heads, Internal Coolant
               Holes and a Cylindrical     DCN-DCXk7                                                 DCONMSh6
             Shank, Drilling Depth 8xD


                Designation          DCN (1)   DCX (2)  DCONMS    LU      PL       LS      OAL     SSC (3)  MIID (4)     INDEXABLE DRILLS
              DCN 0157-125-0236C-8D    .157     .173     .236    1.2842   .02440  1.38     3.059    4.0     ICP 040
              DCN 0177-141-0236C-8D    .177     .193     .236    1.4433   .02598  1.38     3.236    4.5     ICP 045
              DCN 0197-157-0236C-8D    .197     .213     .236    1.6035   .02874  1.38     3.398    5.0     ICP 050
              DCN 0216-172-0236C-8D    .217     .232     .236    1.7642   .03188  1.38     3.571    5.5     ICP 055
             •  Do not mount smaller drilling heads other than the specified range of the drill body   •  For user guide and cutting conditions, see pages 84-96
             (1)  Cutting diameter minimum
             (2)  Cutting diameter maximum
             (3)  Seat size code
             (4)  Master insert identification
             For inserts, see pages: ICP (27) • ICK (37) • ICM (45) • QCP-2M (52) • HCP-IQ (56) • FCP (61)



             DCN C-12D                                          LU        OAL                LS
             Drill Body with Exchangeable   PL
             Heads, Internal Coolant
             Holes and a Cylindrical   DCN-DCXk7                                                     DCONMSh6
             Shank, Drilling Depth 12xD



              Designation            DCN (1)  DCX (2)  DCONMS  LU    PL     LS    OAL    SSC (3)  MIID (4)
              DCN 0236-283-0314C-12D   .236    .252    .315   2.8724   .03779  1.42  4.724  6.0  ICP 060  K DCN 6-9.99-Y
              DCN 0256-307-0314C-12D   .256    .272    .315   3.1173   .04645  1.42  4.972  6.5  ICP 065  K DCN 6-9.99-Y
              DCN 0275-331-0314C-12D   .276    .291    .315   3.3468   .03976  1.42  5.220  7.0  ICP 070  K DCN 6-9.99
              DCN 0295-354-0314C-12D   .295    .311    .315   3.5866   .04330  1.42  5.378  7.0  ICP 075  K DCN 6-9.99
             •  Prior to using the 12xD drill, it is recommended to drill a pre-hole by using a DCN 1.5xD drill or a centering drill   •  The HCP or QCP drilling head may eliminate the need for a
             pre-hole   •  Do not mount smaller drilling heads other than the specified range of the drill body   •  For user guide and cutting conditions, see pages 84-96
             (1)  Cutting diameter minimum
             (2)  Cutting diameter maximum
             (3)  Seat size code
             (4)  Master insert identification
             For inserts, see pages: ICP (27) • ICP-2M (33) • ICK (37) • ICK-2M (41) • ICM (45) • ICN (51) • QCP-2M (52) • HCP-IQ (56) • FCP (61)





































                                                                                                                       23
   20   21   22   23   24   25   26   27   28   29   30