Page 115 - HOLE_MAKING_CATALOG_INCH_2022_P237-P372
P. 115
USER GUIDE
GUNDRILLS
Inquiry Form
BD
DC 0 DCONMSh6
-0.07
LU
PL LF LS
1. Tool
Quantity
Sketch of drilling application
Nominal diameter and tolerance
Please fill in dimensions on the sketch.
Driver
For standard drivers please
use codes from page 353
o Code No.
o Special, please attach sketch and specifications.
2. Workpiece
(If possible, attach a drawing)
2.1 Material Note: It may be necessary to change several of the parameters that you
Material description indicated, based on our experience with your application.
(DIN material number or any other standard):
3.2 Cutting Data:
Cutting Speed Vc SFM
Hardness and Properties:
Revolutions Nmin RPM, Nmax RPM
Feed Fmin IPR,
2.2 Hole Type
Fmax IPR
o Blind Hole o Drilling into Pre-hole
Feed Rate VF IPM
o Angled Entry
Coolant:
o Drilling into Solid o Boring o Angled Exit
o Oil o Soluble Oil o Other
Drilling Depth inch Hole Tolerance
Coolant Pressure: PSI
2.3 Application:
Workpiece: o Stationary o Rotating
Tool: o Stationary o Rotating
3. Machine
3.1 Technical Data
Machine Type Specially Tailored TRIDEEP Code Key
Power kW GD - DH # # . # # - # # # # - # #
Dia. Drilling Shank
Length Type
351