Page 35 - HOLE_MAKING_CATALOG_INCH_2022_P237-P372

USER GUIDE

Guide Pads

Guide pads are subject to wear, like inserts. Please Replace the Filler With
• Each guide pad can be used on two sides. When the Top Guide Pad When:
the first corner wears out 70% of the width, reverse • High hole accuracy is required
the guide pad to use the second corner. • L/D (hole length-to-diameter) ratio is greater than 50:1
• Replace with a new guide pad when • Drilling a workpiece which has a tail stock hole
the second corner wears out. • The DOC required is greater than the range of the
peripheral insert for counterboring. *See chart below. DEEP DRILLING - BTA SYSTEM
Guide pad
IC950 Filler Protector
Wear resistance IC908 Top guide

IC928

Drill diameter D (inch)
For higher wear resistance
• High wear-resistant grade
First recommendation *Maximum DOC of peripheral insert
• Suitable for various workpiece materials
• Long tool life due to unique substrate and coating Cartridge DOC (inch) Guide pad
CAOD-0845 .252 GPS-08.../GPS-10...
For higher fracture resistance CAOD-103 .283 GPS-10.../GPS-14...
• High fracture-resistant grade
CAOD-142 .409 GPS-14.../GPS-18...
CAOD-170 .472 GPS-18...
For diameter less than 3.622”, the drill head is
st
Wear on the 1 corner semi-standard using the top guide pad.
Please contact your dealer for further information.
Guide pad
100% 70% Screw Key

GPS-05 SR 34-508 M2.2x0.45 T-7/5
GPS-06 SR 11201753-1 T-7/5
GPS-07 SR 11201753-4 T-9/5
Reverse and use the 2 corner GPS-08 SR 11201753-4 T-9/5
nd
GPS-10 SR 11201753-6 T-15/5
GPS-12 SR 11201753-6 T-15/5
GPS-14 SR 11201752-2 T-15/5
GPS-18 SR 11201756-7S T-15/5

271