Page 26 - HOLE_MAKING_CATALOG_INCH_2022_P373-P446

REAMERS High Speed Reaming System Important USER GUIDE

with Internal Coolant Holes
with the lead type of the insert. Using an improper
The INDEX-H-REAM standard line covers reaming Lead type of the tool (pads) should be compatible
applications of .315-1.25” hole diameters. insert will damage the tool and the reamed part.
The indexable cutting insert has two cutting corners with
4 lead angle options and 3 rake angle variations, covering
most workpiece material types.
The INDEX-H-REAM single indexable insert with carbide
pads provides a combination of economical and high
precision results on a very wide range of materials.

Guiding Pad Line

The guiding pads are precisely ground for a specific
diameter, and therefore, can only be used for reaming
on appropriate hole sizes. The adjustment mechanism
is designed for a specific diameter setting and for wear
compensation (a few microns only). The same tool
can not be used for reaming different diameters.

Guiding Pad Line
≤800 µin

Tool Designation Code Key

RM SET .3125 (1) H6 T B C625 s
Reamer Single-Edged Tool Hole Diameter Hole Tolerance

Hole Type
B Blind

T Through

Lead Type (2)
A, B, C, D Shank Type
(see page 403) C Cylindrical
Note: A, C,
D - optional W Weldon
(1) To be ordered for each specific diameter and tolerance Reamer Length S-Short
(2) Tool lead type - according to insert’s lead type F Flat

398 ISCAR