Page 96 - HOLE_MAKING_CATALOG_INCH_2022_P447-P626
P. 96
ITS BORE PICCO R/L 090 a 20° 90° WF RE OHN LF DCONMS DMIN
Inserts for Internal
Turning and Profiling
CDX
Dimensions Right-hand shown
IC228
Designation DCONMS WF a LF OHN (1) RE CDX (2) DMIN
PICCO R/L 090.3-10 .157 .024 .102 .945 .354 .004 .008 .110 •
PICCO R/L 090.3-16 .157 .024 .102 1.181 .591 .004 .008 .110 •
PICCO R/L 090.4-10 .157 .059 .138 .945 .354 .004 .012 .157 •
PICCO R/L 090.4-16 .157 .059 .138 1.181 .591 .004 .012 .157 •
PICCO R/L 090.5-10 .197 .075 .173 .984 .354 .006 .020 .197 •
PICCO R/L 090.5-15 .197 .075 .173 1.181 .551 .006 .020 .197 •
PICCO R/L 090.5-20 .197 .075 .173 1.378 .748 .006 .020 .197 •
• Specify right- or left-hand bars
(1) Minimum overhang
(2) Cutting depth maximum
LF
PICCO R 050 (CBN) DCONMS
CBN Tipped Inserts for 5°
Internal Turning, Profiling and WF 8° OHN
Chamfering Hard Steel
a
20° RE CDX
Right-hand shown • Hard Materials
Dimensions
Designation DCONMS WF a LF OHN (1) CDX (2) DMIN RE IB55
PICCO R 050.3-10B .157 .024 .102 1.004 .394 .008 .110 .004 •
PICCO R 050.4-10B .157 .059 .138 1.004 .394 .012 .157 .004 •
PICCO R 050.5-15B .197 .075 .173 1.240 .591 .020 .197 .006 •
PICCO R 050.6-15B .236 .091 .209 1.240 .591 .020 .236 .006 •
PICCO R 050.7-20B .276 .110 .248 1.437 .787 .024 .268 .006 •
• It is not recommended to use coolant when machining with CBN tipped tools • Available on request only
(1) Minimum overhang
(2) Cutting depth maximum
542 ISCAR