Page 145 - MILLING_CATALOG_INCH_2022_P361-P592
P. 145
W1
3M AXKT 1304..R-PDRMM
High Durability Inserts
with a Variety of Corner APMX INSL
Radii for Heavy Milling
BS RE S
Dimensions Tough 1 Hard Recommended MILLING INSERTS
Machining Data
IC328 IC928 ap fz
Designation W1 RE INSL APMX S BS (inch) (inch/t)
3M AXKT 130408R-PDRMM .331 .0315 .556 .472 .179 .055 • • .047-.472 .0039-.0087
3M AXKT 130412R-PDRMM .331 .0472 .531 .472 .174 .047 • • .063-.472 .0059-.0118
3M AXKT 130416R-PDRMM .331 .0630 .531 .472 .172 .031 • • .079-.472 .0059-.0118
3M AXKT 130424R-PDRMM .331 .0945 .531 .472 .165 - • .110-.472 .0059-.0118
• Reduce feed by 50% during engagement and exit from the workpiece; this practice will substantially increase insert life
• Inserts with corner radii larger than .031" should be used on 3M AXK tools only on the face of the cutter • For cutting speed recommendations, see pages 586-591.
W1
3M AXKT 2006..R-PDR
High Durability Inserts
with a Variety of Corner APMX INSL
Radii for Heavy Milling
BS RE S
Recommended
Dimensions Tough 1 Hard
Machining Data
IC328 IC928 ap fz
Designation W1 RE INSL APMX S BS (inch) (inch/t)
3M AXKT 200612R-PDR .531 .0472 .866 .787 .266 .087 • • .063-.787 .0059-.0118
3M AXKT 200616R-PDR .531 .0630 .858 .787 .261 .079 • .079-.787 .0059-.0118
3M AXKT 200624R-PDR .531 .0945 .866 .787 .258 .061 • .110-.787 .0059-.0118
3M AXKT 200632R-PDR .531 .1260 .866 .787 .254 .035 • .142-.787 .0059-.0118
3M AXKT 200640R-PDR .531 .1575 .862 .787 .246 - • • .173-.787 .0059-.0118
• Reduce feed by 50% during engagement and exit from the workpiece. This practice will substantially increase insert life.
• For cutting speed recommendations, see pages 586-591
W1
3M AXKT-2006
High Durability Inserts for INSL
Heavy Milling Applications APMX
RE
BS RE S
Recommended
Dimensions Tough 1 Hard
Machining Data
IC330 IC328 IC830 IC928 IC950 IC808 IC908 IC810 IC910 IC4100 ap fz
Designation W1 INSL APMX S RE BS (inch) (inch/t)
3M AXKT 2006PDTR-RM .531 .882 .787 .268 .0394 .131 • • • .055-.787 .0079-.0157
3M AXKT 2006PDTR .531 .886 .787 .268 .0394 .120 • • • • • • • • • • .055-.787 .0059-.0118
• Reduce feed by 50% during engagement and exit from the workpiece; this practice will substantially increase insert life
• For cutting speed recommendations, see pages 586-591
PDTR-RM PDTR
505