Page 141 - MILLING_CATALOG_INCH_2022_P361-P592

W1
ADMT 1505PDR-HS
Inserts with a Chip Rd°
Splitting Serrated Cutting APMX INSL
Edge for Roughing
S BS RE

Dimensions Tough 1 Hard Recommended MILLING INSERTS
Machining Data

IC328 IC928 IC250 IC950 ap fz
Designation W1 INSL APMX S RE BS (inch) (inch/t)
ADMT 1505PDR-HS .378 .624 .472 .233 .0315 .079 • • • • .472-.472 .0039-.0079
• Self-balanced forces on rake face. Use for long overhang and extended flute cutters for reduced chattering. • For cutting speed recommendations, see pages 586-591
For tools, see pages: ADK (281) • HM90 E90AD-15 (26) • HM90 E90AD-M-15-JHP (27) • HM90 F90A-15 (252) • SM (290)

W1

ADKT 1505PDTR/L-RM
Inserts with Reinforced Helical Rd°
Cutting Edge for Interrupted APMX INSL
Cut and Heavy Machining RE
BS RE S
Recommended
Dimensions Tough 1 Hard
Machining Data

IC328 IC928 IC250 IC950 IC910 IC520M DT7150 IC5100 ap fz
Designation W1 INSL S BS RE APMX (inch) (inch/t)
ADKT 1505PDTR-RM .376 .620 .222 .063 .0394 .472 • • • • • • • • .055-.472 .0039-.0079
ADKT 1505PDTL-RM (1) .376 .622 .222 .063 .0394 .472 • .055-.472 .0039-.0079
• For cutting speed recommendations, see pages 586-591
(1) PDTL-Left-hand inserts are used only for special tools.
For tools, see pages: ADK (281) • HM90 E90AD-15 (26) • HM90 E90AD-M-15-JHP (27) • HM90 F90A-15 (252) • SM (290)

W1

ADKT 1505PDTR-76
Inserts with 2 Helical Cutting Rd°
Edges with Ribs Along the APMX INSL
Edge for Interrupted Cuts
BS RE S
Recommended
Dimensions Tough 1 Hard
Machining Data

IC330 IC328 IC830 IC928 IC950 IC910 IC520M ap fz
Designation W1 INSL S RE BS APMX (inch) (inch/t)
ADKT 1505PDTR-76 .376 .620 .222 .0394 .063 .472 • • • • • • • .079-.472 .0031-.0059
• Reinforced helical cutting edge with ribs on rake face reducing heat transfer, for interrupted cuts and medium to heavy machining.
• For cutting speed recommendations, see pages 586-591
For tools, see pages: ADK (281) • HM90 E90AD-15 (26) • HM90 E90AD-M-15-JHP (27) • HM90 F90A-15 (252) • SM (290)

501