Page 35 - NEW_PRODUCT_CATALOG_2022

TWISTED 2-SIDED D120
DGAQ-JHP
Parting and Grooving Square OAH OAH HF Bar Max
Adapters with Internal Coolant CUTDIA CUTDIA
Holes Carrying DO-GRIP Inserts
OAL CWN-CWX OAL CWN-CWX
WB WB
Designation OAL OAH CWN (1) CWX (2) WB HF CUTDIA (3) MIID (4) CSP (5)
DGAQ D52-2-2Z-JHP 50.00 50.00 1.90 2.50 1.72 43.5 52.0 DGN 2 1
DGAQ D52-3-2Z-JHP 50.00 50.00 3.00 3.18 2.50 43.5 52.0 DGN 3 1
DGAQ D52-4-2Z-JHP 50.00 50.00 4.00 4.00 3.20 43.5 52.0 DGN 4 1
DGAQ D82-3-2Z-JHP 64.40 64.40 3.00 3.18 2.50 58.0 82.0 DGN 3 1
DGAQ D82-4-2Z-JHP 64.40 64.40 4.00 4.00 3.20 58.0 82.0 DGN 4 1
DGAQ D82-5-2Z-JHP 64.40 64.40 5.00 5.00 4.00 58.0 82.0 DGN 5 1
DGAQ D120-4-4Z-JHP 90.50 90.50 4.00 4.00 3.20 84.0 120.0 DGN 4 1
DGAQ D120-5-4Z-JHP 90.50 90.50 5.00 5.00 4.00 84.0 120.0 DGN 5 1
• When using 2 and 3mm double-sided inserts, the depth of cut is limited up to 19mm. For larger depth, use a DGNM type single-ended insert.
(1) Minimum cutting width
(2) Maximum cutting width
(3) Maximum diameter for parting
(4) Master insert identification
(5) 0 - Without coolant supply, 1 - With coolant supply
Flow Rate vs. Pressure
70 Bar 100 Bar 140 Bar
Designation Flow Rate (liters/min) Flow Rate (liters/min) Flow Rate (liters/min)
DGAQ D.../-2/-3...-JHP 4-7 5-8 6-9
DGAQ D.../-4/-5...-JHP 6-7 7-8 8-9

Spare Parts
Designation
DGAQ-JHP SR M4X9-SEAL-JHP JHP COPPER SEAL 1/8" EDG 33A*
* Optional, should be ordered separately

TWISTED 2-SIDED D120

DGAQ
Parting and Grooving OAH OAH HF
Square Adapters Carrying CUTDIA CUTDIA
DO-GRIP Inserts
OAL CWN-CWX OAL CWN-CWX
WB WB
Designation OAL OAH CWN (1) CWX (2) WB HF CUTDIA (3) MIID (4) CSP (5)
DGAQ D52-2-2Z 50.00 50.00 1.90 2.50 1.72 43.5 52.0 DGN 2 0
DGAQ D52-3-2Z 50.00 50.00 3.00 3.18 2.50 43.5 52.0 DGN 3 0
DGAQ D52-4-2Z 50.00 50.00 4.00 4.00 3.20 43.5 52.0 DGN 4 0
DGAQ D82-3-2Z 64.40 64.40 3.00 3.18 2.50 58.0 82.0 DGN 3 0
DGAQ D82-4-2Z 64.40 64.40 4.00 4.00 3.20 58.0 82.0 DGN 4 0
DGAQ D82-5-2Z 64.40 64.40 5.00 5.00 4.00 58.0 82.0 DGN 5 0
DGAQ D120-4-4Z 90.50 90.50 4.00 4.00 3.20 84.0 120.0 DGN 4 0
DGAQ D120-5-4Z 90.50 90.50 5.00 5.00 4.00 84.0 120.0 DGN 5 0
• When using 2 and 3mm double-sided inserts, the depth of cut is limited up to 19mm. For larger depth, use a DGNM type single-ended insert.
(1) Minimum cutting width
(2) Maximum cutting width
(3) Maximum diameter for parting
(4) Master insert identification
(5) 0 - Without coolant supply, 1 - With coolant supply

Spare Parts
Designation
DGAQ SR ISO 14580 M4X10 EDG 33A*
* Optional, should be ordered separately

33