Page 83 - Turning_catalog_INCH_2022_45_P1-112
P. 83
USER GUIDE
Assembly and Safety Guidelines when using JET HP ISO Maximum Pressure of 4350 PSI.
Turning and Grooving tools.Before use, please ensure that: ISOTURN TOOLS
• The machine door is in a fully closed position
• The coolant hose is in the correct location and
fully tightened with all seals in position
• A blank plug is inserted into the unused coolant hole
• All O-rings and washers are in place
• The coolant hose is tightened securely to the tool
holder and tool block to prevent coolant leakage
Important
Always pay attention not to exceed the maximum
safe working pressure of 4350 PSI.
Maximum Pressure of 4350 PSI.
Mounting Plug Screw
Screw
Nozzle Tube
Housing
O-Ring
Plug Screw Mounting Screw
Nozzle Tube
Housing
O-Ring
Frontal Coolant Channel
On/Off Screw
Copper Seal Washer 1/8”
1/8" BSPP Adapting Nipple
H.P. Coolant Hose
81
