Page 85 - Turning_catalog_INCH_2022_45_P261-508

INSL
INGT-R/L S
Precision, Double-Ended Flat
Top Deep Grooving Inserts
3˚ CDX
CW BW
RE Right-hand shown GROOVE-TURN

Dimensions Recommended Machining Data

IC807 f groove
Designation CW CWTOL (1) RE RETOL (2) CDX BW S INSL (IPR)
INGT3094R/L .094 .00100 .0075 .0025 .275 .195 .344 1.370 • .0020-.0031
INGT3125R/L .125 .00100 .0075 .0025 .437 .195 .344 1.370 • .0031-.0047
• DMIN according to related boring bar
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
For tools, see pages: FLSR/LT (347)

INSL
INF-RCB/LCB S
Double-Ended Precision
Face Grooving Inserts CDX
with a Chipformer CW 3˚
BW
RE Right-hand shown
Recommended
Dimensions
Machining Data

IC807 f face-groove
Designation CW CWTOL (1) RE RETOL (2) CDX DAXN (3) BW S INSL (IPR)
INF3125R/LCB .125 .00100 .0075 .0025 .180 .94 .195 .344 .890 • .0035-.0055
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) Minimum axial grooving diameter
For tools, see pages: A-FLER/L (349) • FLASR/L (348) • FLSR/L (347) • H-FLER (349)

INSL

INFD-RCB/LCB
Single-Ended Precision S
Deep Face Grooving Inserts 3˚ CDX
with a Chipformer
CW BW
RE Right-hand shown
Recommended
Dimensions
Machining Data

IC807 f face-groove
Designation CW CWTOL (1) RE RETOL (2) CDX DAXN (3) BW S INSL (IPR)
INFD3125R/LCB .125 .00100 .0075 .0025 .250 1.87 .195 .344 .990 • .0035-.0055
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) Minimum axial grooving diameter
For tools, see pages: A-FLER/L (349) • FLASR/L (348) • FLSR/L (347) • H-FLER (349)

345