Page 116 - THREADING CATALOG

THREAD TURNING TIP-WT SCREW Dimensions 55° RE .697 Ref. H CW Tough 1 Hard
±.001

Precision Ground Double-Ended
Threading Inserts with a 55°
Partial Profile and a Chipformer
TIP inserts are .063" longer than GIP in the same pocket
C
I
N
NUT
55°

RE
Designation
CW
TIP 2WT-0.05
12.00
.0012
54.00
•
•
TIP 4WT-0.15 (1) .094 .002 RETOL (2) TPIX (3) TPIN (4) • IC08 • IC908
(1)
7.00
.0012
19.00
.157
.006
TIP 5WT-0.25 (1) .217 .010 .0012 12.00 6.00 •
• Toolholder seat needs to be modified according to insert profile to ensure clearance
• Pitch max 0.187xD
• internal & external tolerance: B.S.84 medium class
• D-Diameter of thread (inch)
(1) TPIN(thread per inch minimum) = D/6.4
(2) Corner radius tolerance (+/-)
(3) Threads per inch maximum
(4) Threads per inch minimum
Tools: C#-GHDR/L • CGHN 26-M • CGHN 32-DGM • CGHN 32-M • CGHN-D • CGHN-DG • CGHN-S • CGPAD • CGPAD-JHP
• GHDR/L (short pocket) • GHDR/L-JHP (short pocket) • GHGR/L • GHMPR/L • GHMR/L • GHSR/L • GHSR/L-JHP-SL • NQCH-GHSR/L-JHP

±0.025 10 Ref.
GEPI-WT 2.9 Ref.
Precision Ground Double-Ended 8˚
Threading Inserts with a 55° CW PNA
Partial Profile and a Chipformer RE BW
for 11.5 mm Bore Diameter
NUT M E T R I C
55°
Dimensions Tough 1 Hard
SCREW
Designation CW RE RETOL (1) PNA BW TPN (2) TPX (3) TPIN (4) TPIX (5) IC08 IC908
GEPI 2.5-WT0.05 2.50 0.05 0.030 55.0 1.80 0.470 2.540 10.00 54.00 • •
• Toolholder seat needs to be modified according to insert profile to ensure clearance
• Pitch max 0.167xD, TPI min D/6.0
• internal & external tolerance: B.S.84 medium class
(1) Corner radius tolerance (+/-)
(2) Thread pitch minimum (mm)
(3) Thread pitch maximum (mm)
(4) Threads per inch minimum
(5) Threads per inch maximum
Tools: AVC-GEAIR/L • E-GEHIR / E-GHIR • GEAIR/L • GEHIMR/L • GEHIMR/L-SC • GEHIR/L • GEHIR/L-SC • GEHSR • GEHSR/L-SL

ISCAR
114