Page 119 - THREADING CATALOG

PNA RE
GIQR/L-WT PDPT Medium class
Internal Inserts with Whitworth L WF B.S.84
Partial Profile for Threading
in .31" and Larger Holes
Left-hand shown
NUT I N C H THREAD TURNING
55°
Dimensions

SCREW
IC528
Designation L RE PNA PDPT (1) WF DMIN TPIN (2) TPIX (3)
GIQR/L 8-WT-0.05 .306 .002 55.0 .059 .189 .315 16.00 50.00 •
GIQR/L 11-WT-0.05 .420 .002 55.0 .079 .264 .433 11.00 50.00 •
• Can be used for thread milling by circular interpolation
• TPI min D/5.9
• D-diameter of thread (pitch max<=W)
• For cutting speed recommendations, see pages 104-105
(1) Cutting depth maximum
(2) Threads per inch minimum
(3) Threads per inch maximum
Tools: MG • MGCH

OAL
DCONMS X
PICCO-55°-Thread OHN PDX Medium class
55°
Inserts for 55° Internal PDX B.S.84
Thread Profile a WF HC
x CF
Right-hand shown
NUT M E T R I C
55°
Dimensions

SCREW

Designation DCONMS TPIX (1) TPIN (2) HC CF PDX WF a OHN (3) OAL DMIN IC228
PICCO R 005.5548-15 5.00 48.00 24.00 0.40 0.06 0.5 1.90 4.40 15.0 30.00 4.80 •
PICCO R 006.5548-15 6.00 48.00 24.00 0.40 0.06 0.5 2.30 5.30 15.0 30.00 6.00 •
PICCO R 006.5524-15 6.00 24.00 16.00 0.81 0.12 0.8 2.30 5.30 15.0 30.00 6.00 •
PICCO R 007.5524-15 7.00 24.00 16.00 0.81 0.12 0.8 2.80 6.30 15.0 30.00 7.00 •
• All mini-bars have sharp corners
• For detailed cutting data, see pages 104-105
(1) Threads per inch maximum
(2) Threads per inch minimum
(3) Minimum overhang
Holders: PICCO ACE • PICCO/MG PCO (Holder)
I N C H

Dimensions

IC228
Designation DCONMS TPIX (1) TPIN (2) HC CF PDX WF a OHN (3) OAL DMIN
PICCO R 005.5548-15 .197 48.00 24.00 .016 .002 .02 .075 .173 .591 1.181 .189 •
PICCO R 006.5548-15 .236 48.00 24.00 .016 .002 .02 .091 .209 .591 1.181 .236 •
PICCO R 006.5524-15 .236 24.00 16.00 .032 .005 .03 .091 .209 .591 1.181 .236 •
PICCO R 007.5524-15 .276 24.00 16.00 .032 .005 .03 .110 .248 .591 1.181 .276 •
• All mini-bars have sharp corners
• For detailed cutting data, see pages 104-105
(1) Threads per inch maximum
(2) Threads per inch minimum
(3) Minimum overhang
Holders: PICCO ACE • PICCO/MG PCO (Holder)

117