Page 113 - HOLE MAKING CATALOG p185-310

USER GUIDE GUNDRILLS

SUMOGUN Inquiry Form

Tube L1

Dk7 Th
T
SUMOCHAM Connector
Drilling Head L GDV Driver

1. Tool Sketch of drilling application
Quantity

Nominal diameter and tolerance
Please fill in dimensions on the sketch.

Driver
For standard drivers please use designation from page 294

Special Driver

o Code No. Note: It may be necessary to change several of the parameters that you
indicated, based on our experience with your application.
o Special, please attach sketch and specifications.
2. Workpiece 3. Machine
(If possible, please attach a drawing) 3.1 Technical Data

2.1 Material Machine Type
Material description (DIN material number or any other standard):
Power:
Hardness and Properties: kW
3.2 Cutting Data: RPM
o Short Chips o Long Chips Cutting Speed Vc

2.2 Hole Type o Drilling into Pre-hole Revolutions Nmin m/min
o Blind Hole o Drilling into Solid RPM, Nmax
o Angled Entry o Angled Exit Feed Fmin mm/rev,
o Boring mm/rev
Fmax mm/min
Drilling Depth mm Hole Tolerance
Feed Rate VF o Other
2.3 Application: o Stationary o Rotating Coolant:
Workpiece: o Stationary o Rotating o Oil o Soluble Oil

Tool: Coolant Pressure: Bar

Drill Body Type Hole Diameter Length Metric Fine Pictch Dwg. Number Tool Type
SNT Steel body Ø10.00-25.99 1=M16 Type
CNT For C.N.C Drilling Depth 1=M20 4 last digits Code
GDT For Gundrill Total length No code Standard shape and size
Guide Pads
GP
SC Special Connector
PT P-Tube

MN ### - XXX - XXX - MF 1 GP - XXXX

Drilling Head Mounting Procedure

12 345

297