Page 95 - HOLE MAKING CATALOG p185-310
P. 95
USER GUIDE DEEP DRILLING - BTA SYSTEM
Requested Information Form for Deep Hole Drill Design
Company name Telephone no.
Address Date
Contact person Customer no.
Workpiece No. of holes: Hole diameter:
Product name: Deviation (mm/100): Tolerance (of hole):
Hole depth: Straightness (mm/100):
Surface finish (Rz, Ra...):
Material
Material (DIN, AISI, JIS...):
Hardness (HB, HS, HRC...):
Condition: o Quenched o Tempered o Cast o Annealed
o Other
Machine
Machine supplier name:
Machine type/model: o NC lathe o Machining center o Other
Rigidity: o Good o Normal o Poor
Spindle power (kW):
Tool and/or workpiece rotation (TR/WR):
o Tool and workpiece o Rotating workpiece (WR) o Rotating tool (TR)
Type of Coolant o Soluble o Emulsion %
Water based: o Uncoated
Oil based: o Coolant Pressure (bar): Coolant Volume (L/min): (mm/inch)
Tool Drill Head (mm/inch)
Drill diameter:
Thread: o Inner o Outer o Brazed
Indexable: o Adjustable o Direct mount Coating: o Coated
o Solid drilling o Counterboring
Pre-drilled hole size: (mm/inch)
Bottom finishing: o Full ball R o Flat bottom R o Corner R o Other
Trepanning: oY oN
Tube outer diameter: (mm/inch) Core size diameter:
Please fill in and return to your ISCAR representative.
279
