Page 70 - HOLE MAKING CATALOG p383-544

ITS BORE 80° 99° 95º
95º
IC6025
IC8250 91° 95º
IC6015
IC8150 Recommended
IC20 Machining Data
IC5010
IC428
IC5005
IC806
IC807
IC907
CCMT/CCGT-SM IC D1
Single-Sided Turning Inserts for RE L
Semi-Finish and Finishing on 7°
Soft Materials and Exotic Alloys S

Dimensions Tough 1 Hard

ap f

Designation L IC S RE D1 (mm) (mm/rev)
• 0.25-2.00 0.05-0.20
CCGT 060201-SM 6.45 6.35 2.38 0.10 2.80 • 0.25-2.00 0.05-0.25

CCGT 060202-SM 6.45 6.35 2.38 0.20 2.80 •• • 0.25-2.00 0.05-0.25

CCMT 060202-SM 6.45 6.35 2.38 0.20 2.80 • • • 0.50-2.50 0.07-0.25
CCMT 060204-SM 6.45 6.35 2.38 0.40 2.80 • • • •
CCMT 060208-SM 6.45 6.35 2.38 0.80 2.80 • • • • 0.50-2.50 0.07-0.25
CCMT 09T302-SM 9.70 9.52 3.97 0.20 4.40 • • • • • • 0.50-2.50 0.06-0.25
CCMT 09T304-SM 9.70 9.52 3.97 0.40 4.40 • • • • • • • • • • 0.50-2.50 0.06-0.25
CCMT 09T308-SM 9.70 9.52 3.97 0.80 4.40 • • • • • • • • • 0.50-3.00 0.07-0.25
CCMT 120404-SM 12.90 12.70 4.76 0.40 5.50 •• • • • 0.70-3.50 0.07-0.25
CCMT 120408-SM 12.90 12.70 4.76 0.80 5.50 • • • • • • 0.70-3.50 0.07-0.30

For tools, see pages: IHCR (408) • IHRF (436) • IHRF-BW (439) • IHRF-C (413) • IHRF-CH (439) • IHSR (408) • IHSR-BW (410) • IHSR-C (413) • IHSR-CH (409)

80° 95º

CCMT-PF IC D1 Recommended
80° Rhombic Inserts with a RE L Machining Data
Positive Flank for Semi-Finish 7°
and Finishing on Soft S
Materials and Exotic Alloys

Dimensions Tough 1 Hard

IC830 ap f
IC6025
Designation L IC S RE D1 IC6015 (mm) (mm/rev)
IC806
IC807
IC907
IC804

CCMT 060202-PF 6.30 6.35 2.38 0.20 2.80 • • • • • • 0.20-2.50 0.04-0.25
2.80 • • • • • •
CCMT 060204-PF 6.30 6.35 2.38 0.40 0.40-2.50 0.04-0.30
4.40 • • • • • 0.50-3.00 0.05-0.30
CCMT 09T302-PF 9.70 9.52 3.97 0.20 4.40 • • • • • • • 0.50-3.50 0.05-0.35

CCMT 09T304-PF 9.70 9.52 3.97 0.40

For tools, see pages: IHCR (408) • IHRF (436) • IHRF-BW (439) • IHRF-C (413) • IHRF-CH (439) • IHSR (408) • IHSR-BW (410) • IHSR-C (413) • IHSR-CH (409)

452 ISCAR