Page 71 - HOLE MAKING CATALOG p383-544
P. 71
IC830 80° 99° 95º
IC8250 95º
CCMT-14 IC IC20D1
80° Rhombic Inserts with a RE L IC428 91° 95º
7° Positive Flank for Semi- IC50057°
Finishing and Finish Turning IC807S Recommended
IC907Machining Data
Dimensions Tough 1 Hard
ITS BORE
ap f
Designation L IC S RE D1 (mm) (mm/rev)
2.80 • • • • • • 0.50-2.50 0.14-0.25
CCMT 060204-14 6.30 6.35 2.38 0.40 • • • 0.50-3.00 0.14-0.25
CCMT 09T304-14 9.70 9.52 3.97 0.40 4.40
4.40 • • • • •
CCMT 09T308-14 9.70 9.52 3.97 0.80 5.50 • • 0.80-3.00 0.14-0.30
CCMT 120408-14 12.90 12.70 4.76 0.80 0.80-3.00 0.14-0.30
For tools, see pages: IHCR (408) • IHRF (436) • IHRF-BW (439) • IHRF-C (413) • IHRF-CH (439) • IHSR (408) • IHSR-BW (410) • IHSR-C (413) • IHSR-CH (409)
CCET-WF 86° 80° 95º
80° Rhombic Inserts with a 7° IC 95º
Positive Flank and a Wiper Near D1
the Corner for High Feed Finishing RE 7° 95º
0.3 RE
L S
Dimensions
Recommended Machining Data
IC907 ap f
Designation L IC S RE D1 (mm) (mm/rev)
• 0.05-2.00
CCET 0602005-WF 6.30 6.35 2.38 0.05 2.80 • 0.05-2.00 0.01-0.20
0.01-0.20
CCET 09T3005-WF 9.50 9.52 3.97 0.05 4.40
For tools, see pages: IHCR (408) • IHRF (436) • IHSR (408) • IHSR-BW (410) • IHSR-C (413) • IHSR-CH (409)
CCMT/CCGT 80° 95º 99°
80° Rhombic Inserts with a 95º 91°
7° Positive Flank for Semi- D1
Finishing and Finish Turning 7° 95º
IC S
RE L
Tough 1 Hard
Dimensions Recommended
Machining Data
IC8250 ap f
IC30N
Designation L IC S RE D1 IC20 (mm) (mm/rev)
IC20N
IC520N
CCGT 060202 6.45 6.35 2.38 0.20 2.80 • 0.50-2.00 0.10-0.20
••
CCGT 060202L (1) 6.45 6.35 2.38 0.20 2.80 • 0.50-2.00 0.10-0.20
CCGT 060204 6.45 6.35 2.38 0.40 2.80 • 0.50-2.00 0.10-0.20
CCGT 060204L (1) 6.45 6.35 2.38 0.40 2.80 0.50-2.00 0.10-0.20
6.45 6.35 2.38 0.20 2.80 • •
CCMT 060202 • •• 0.50-2.00 0.10-0.20
CCMT 060204 6.45 6.35 2.38 0.40 2.80 •• 0.50-2.00 0.12-0.22
CCMT 09T302 9.70 9.52 3.97 0.20 4.40 •• 0.50-2.50 0.12-0.25
••
CCMT 09T304 9.70 9.52 3.97 0.40 4.40 0.50-2.50 0.12-0.25
CCMT 09T308 9.70 9.52 3.97 0.80 4.40 0.80-3.00 0.14-0.25
• Use left-hand inserts for left-hand external tools and for right-hand internal tools
(1) Left-hand insert
For tools, see pages: IHCR (408) • IHRF (436) • IHRF-BW (439) • IHRF-C (413) • IHRF-CH (439) • IHSR (408) • IHSR-BW (410) • IHSR-C (413) • IHSR-CH (409)
453
