Page 73 - HOLE MAKING CATALOG p383-544
P. 73
CCGT-AS 80˚ IC20 95º 99°
80° Rhombic Inserts with a 7° 7˚ 95º 91°
Positive Flank, Very Positive D1 ITS BORE
Rake Angle and Sharp Cutting 95º
Edge for Machining Aluminum S
IC L
RE
Dimensions Recommended Machining Data
ap f
Designation L IC S RE D1 (mm) (mm/rev)
2.80 • 0.50-2.00 0.10-0.20
CCGT 060201-AS 6.40 6.35 2.38 0.10 2.80 • 0.50-2.00 0.10-0.20
CCGT 060202-AS 6.40 6.35 2.38 0.20 2.80 • 0.50-2.00 0.10-0.25
CCGT 060204-AS 6.40 6.35 2.38 0.40 4.40 • 0.50-2.50 0.10-0.25
CCGT 09T301-AS 9.70 9.52 3.97 0.10 4.40 • 0.50-2.50 0.10-0.25
CCGT 09T302-AS 9.70 9.52 3.97 0.20 4.40 • 0.50-2.50 0.10-0.25
CCGT 09T304-AS 9.70 9.52 3.97 0.40 4.40 • 0.80-3.00 0.10-0.30
CCGT 09T308-AS 9.70 9.52 3.97 0.80 5.50 • 0.50-2.50 0.10-0.25
CCGT 120402-AS 12.90 12.70 4.76 0.20 5.50 • 0.50-2.50 0.10-0.25
CCGT 120404-AS 12.90 12.70 4.76 0.40
CCGT 120408-AS 12.90 12.70 4.76 0.80 5.50 • 1.00-3.50 0.10-0.30
For tools, see pages: IHCR (408) • IHRF (436) • IHRF-BW (439) • IHRF-C (413) • IHRF-CH (439) • IHSR (408) • IHSR-BW (410) • IHSR-C (413) • IHSR-CH (409)
CCGT-AF 80˚ 95º 99°
80° Rhombic Inserts with a 7° 7˚ 95º 91°
Positive Flank, Very Positive D1
Rake Angle and Sharp Cutting 95º
Edge for Machining Aluminum S
IC
RE L Recommended Machining Data
Dimensions
IC20 ap f
Designation L IC S RE D1 (mm) (mm/rev)
• 0.80-3.00
CCGT 09T308-AF 9.70 9.52 3.97 0.80 4.40 • 1.00-3.50 0.15-0.25
0.15-0.30
CCGT 120408-AF 12.90 12.70 4.76 0.80 5.50
For tools, see pages: IHCR (408) • IHRF (436) • IHSR (408) • IHSR-BW (410) • IHSR-C (413) • IHSR-CH (409)
455