Page 49 - MILLING CATALOG p001-094
P. 49
MM EDF 90° THSZMS ENDMILLS • SOLID CARBIDE • MULTI-MASTER
Interchangeable 3 Flute Solid DRVS
Carbide Heads for Upper
and Bottom Chamfering DC 90° DCONMS
L7 L6
LF
Dimensions
Designation DC DCONMS NOF(1) L6 L7 LF THSZMS IC908
T04
MM EDF074-090-58-3T04 7.40 5.80 3 0.90 1.00 10.00 T05 •
T06 •
MM EDF094-090-76-3T05 9.40 7.60 3 0.90 1.00 12.50 •
MM EDF116-090-95-3T06 11.60 9.60 3 1.00 1.00 16.50
• For shanks, see pages 84-91 • For clamping keys (should be ordered separately), tightening torques and clamping instructions, see pages 91-92
• Do not apply lubricant to the threaded connection. • For user guide see pages 44, 177-184
(1) Number of flutes
MM TS-45 RE l THSZMS
Interchangeable Solid KAPR DCONMS
Carbide Small Diameter DC
45° Chamfering Heads
CDX LF
LU
Dimensions
Designation DC KAPR(1) CDX(2) RE NOF(3) l THSZMS DCONMS LU LF IC908
MM TS077-45-20A-4T05 7.70 45.0 1.20 0.20 4 15.20 T05 8.00 10.3 13.85 •
• For clamping keys (should be ordered separately), tightening torques and clamping instructions, see pages 91-92 • Do not apply lubricant to the threaded connection
(1) Tool cutting edge angle
(2) Cutting depth maximum
(3) Number of flutes
CDX RE/FW DC
MM GRIT-45A KAPR KAPR
Interchangeable Solid
Carbide Small Diameter THSZMS
45° Chamfering Heads
CW
Dimensions
Designation DC KAPR(1) CDX(2) RE FW CW THSZMS NOF(3) IC908
MM GRIT18K-45A-3T6 17.70 45.0 1.40 0.10 - 3.47 T06 3 T-25/3* •
3 T-25/3* •
MM GRIT18P-45A-3T6 17.70 45.0 1.40 0.10 - 3.47 T06 4 T-30/3 L* •
6 T-40/3 L* •
MM GRIT22K-45A-4T8 21.70 45.0 1.70 - 1.50 5.55 T08
MM GRIT28K-45A-6T10 27.70 45.0 4.00 - 0.50 9.80 T10
• P-TYPE - Positive geometry for soft and gummy materials. • K-Type - For general steel machining. • Modification options on request.
• Do not apply lubricant to the threaded connection. • For clamping instructions, see pages 91-92 • For shanks, see pages 84-91
(1) Tool cutting edge angle
(2) Cutting depth maximum
(3) Number of flutes
* Optional, should be ordered separately
47