Page 50 - MILLING CATALOG p001-094
P. 50
ENDMILLS • SOLID CARBIDE • MULTI-MASTER CDX RE/FW DC
MM GRIT-K/P-45A KAPR KAPR
Interchangeable Solid
Carbide Small Diameter THSZMS
45° Chamfering Heads
CW
Dimensions
Designation DC KAPR(1) CDX(2) RE FW CW THSZMS NOF(3) IC528
MM GRIT 18K-45A 17.70 45.0 1.40 0.10 - 3.40 T06 3 MM EGR 16-18* •
MM GRIT 18P-45A •
MM GRIT 22K-45A 17.70 45.0 1.40 0.10 - 3.40 T06 3 MM EGR 16-18* •
MM GRIT 22P-45A
MM GRIT 28K-45A 21.70 45.0 1.70 - 1.50 5.50 T08 4 MM EGR 20-22* •
21.70 45.0 1.70 - 1.50 5.50 T08 4 MM EGR 20-22* •
27.70 45.0 4.00 - 0.50 9.80 T10 6 T-40/3 L*
• Use carbide shanks for groove milling heads. • Keys for other milling heads must be ordered separately. • MM GRT.. shanks serve mainly for MM GRIT.. slitting heads.
• K-Type - For general steel machining. • P-Type - Positive geometry for soft and gummy materials. • For user guide see pages 44, 177-184
(1) Tool cutting edge angle
(2) Cutting depth maximum
(3) Number of flutes
* Optional, should be ordered separately
MM GRIT Dovetail DC THSZMS
Interchangeable Solid
Carbide Heads CDX KAPR
RE APMX
Dimensions Tough 1 Hard
Designation DC KAPR(1) CDX(2) APMX RE THSZMS NOF(3) IC528
IC908
MM GRIT 28K-45D-6T10 27.70 135.0 4.00 5.00 0.20 T10 6 T-40/3 L* • •
• •
MM GRIT 28K-60D-6T10 27.70 120.0 4.00 7.80 0.20 T10 6 T-40/3 L* • •
MM GRIT 28K-75D-6T10 27.70 105.0 2.20 10.10 0.20 T10 6 T-40/3 L*
• Use carbide shanks for groove milling heads • For user guide see pages 44, 177-184
(1) Tool cutting edge angle
(2) Cutting depth maximum
(3) Number of flutes
* Optional, should be ordered separately
MM GRIT 28K-45D-6T10 MM GRIT 28K-60D-6T10 MM GRIT 28K-75D-6T10
48 ISCAR