Page 51 - MILLING CATALOG p001-094
P. 51
MM GRIT 28P-DR DCX DC THSZMS ENDMILLS • SOLID CARBIDE • MULTI-MASTER
Interchangeable 6 Flute Solid DCONMS
Carbide Double-Sided Corner
Rounding Milling Heads
PRFRAD CF
CW
LF
Dimensions Tough 1 Hard
Designation PRFRAD CF DCX(1) DC LF CW NOF(2) THSZMS DCONMS IC528 IC908
MM GRIT 28P-2.7-DR1.0 1.00 2.70 27.70 24.80 6.00 5.60 6 T10 15.30 T-40/3 L* • •
MM GRIT 28P-2.6-DR2.0 2.00 6 • •
3.00 2.60 27.70 22.90 7.70 7.30 6 T10 15.30 T-40/3 L* • •
MM GRIT 28P-2.3-DR3.0 4.00 6 • •
MM GRIT 28P-2.6-DR4.0 2.30 27.70 21.10 9.70 8.90 T10 15.30 T-40/3 L*
2.60 27.70 19.70 11.70 10.90 T10 15.30 T-40/3 L*
• For shanks, see pages 84-91 • For clamping keys (should be ordered separately), tightening torques and clamping instructions, see pages 91-92
• Do not apply lubricant to the threaded connection. • For user guide see pages 44, 177-184
(1) Cutting diameter maximum
(2) Number of flutes
* Optional, should be ordered separately
MM HR DCXh10 DC THSZMS
Interchangeable 2 Flute DCONMS
Solid Carbide Corner
Rounding Milling Heads PRFRAD
APMX ECONOMICAL SOLUTION
LF
Dimensions
Designation DCX(1) PRFRAD Tm(2) NOF(3) DC APMX THSZMS DCONMS LF IC908
MM HR1.0/047-5.8-2T05 8.00 1.00 r0.5-3.0 2 5.80 7.50 T05 7.60 10.60 •
12.50 •
MM HR1.6/063-6.8-2T06 10.00 1.60 r0.5-3.0 2 6.80 9.50 T06 9.50 12.50 •
12.50 •
MM HR2.0/078-6.0-2T06 10.00 2.00 r0.5-3.0 2 6.00 9.50 T06 9.50 15.60 •
15.60 •
MM HR2.5/094-5.1-2T06 10.00 2.50 r0.5-3.0 2 5.10 9.50 T06 9.50 19.10 •
17.40 •
MM HR3.0/125-6.5-2T08 12.70 3.00 r0.5-4.0 2 6.50 12.00 T08 11.50
MM HR4.0/156-4.7-2T08 12.70 4.00 r0.5-4.0 2 4.70 12.00 T08 11.50
MM HR5.0/188-6.2-2T10 16.00 5.00 r0.5-5.0 2 6.20 15.00 T10 15.20
MM HR6.0/236-8.0-2T12 20.00 6.00 r0.5-6.0 2 8.00 7.00 T12 18.45
• For shanks, see pages 84-91 • For clamping keys (should be ordered separately), tightening torques and clamping instructions, see pages 91-92
• Do not apply lubricant to the threaded connection. • For user guide see pages 44, 177-184
(1) Cutting diameter maximum
(2) Specially tailored radius range upon request.
(3) Number of flutes
MM ER DCX DC THSZMS
Interchangeable 4 Flute PRFRAD DCONMS
Solid Carbide Corner
Rounding Milling Heads
LF
Dimensions
Designation PRFRAD Tm(1) DC DCX(2) DCONMS NOF(3) LF THSZMS IC908
MM ER1.0/047-5.8-4T05 1.00 0.5-1.4 5.80 8.00 8.00 4 10.00 T05 •
T06 •
MM ER1.6/063-6.8-4T06 1.60 0.5-2.5 6.80 10.00 10.00 4 13.00 T06 •
T06 •
MM ER2.0/078-6.0-4T06 2.00 0.5-2.5 6.00 10.00 10.00 4 13.00 T08 •
MM ER2.5/094-5.1-4T06 2.50 0.5-2.5 5.10 10.00 10.00 4 13.00
MM ER3.0/125-6.5-4T08 3.00 0.5-3.1 6.50 12.70 12.70 4 16.50
• For shanks, see pages 84-91 • For clamping keys (should be ordered separately), tightening torques and clamping instructions, see pages 91-92
• Do not apply lubricant to the threaded connection. • For user guide see pages 44, 177-184
(1) Specially tailored radius range upon request.
(2) Cutting diameter maximum
(3) Number of flutes
49