Page 59 - MILLING CATALOG p319-550
P. 59
GIM-J ±0.1 SLOTTING & SLITTING CUTTERS
Utility Single-Sided Inserts
for Parting and Grooving 7° 5
Soft Materials, Tubes 15.3 Ref.
and Small Diameters
CW BW
RE
Dimensions Tough 1 Hard Recommended
Machining Data
IC328 f groove
IC830
CWTOL(1) IC354
0.05 IC908
0.05 IC20
Designation CW RE 0.05 BW (mm/rev)
•••••
GIM 2.2J 2.20 0.17 1.70 ••••• 0.06-0.13
GIM 3J 3.00 0.25
4.00 0.25 2.40 ••••• 0.08-0.15
GIM 4J
3.20 0.08-0.18
• For cutting speed recommendations and user guide, see pages 542-547
(1) Cutting width tolerance (+/-)
For tools, see pages: GM-DG (374)
±0.1
GIM-C 7° 5
Parting and Grooving Single-Sided 15.3 Ref.
Inserts for Parting Bars, Hard
Materials and Tough Applications CW BW
RE
Dimensions Tough 1 Hard Recommended
Machining Data
IC328 f groove
IC830
CWTOL(1) IC354
IC908
0.05 IC20
Designation CW RE 0.05 BW (mm/rev)
0.05 •••••
GIM 3C 3.00 0.22 0.05 2.40 0.15-0.25
GIM 4C 4.00 0.25 3.40 • 0.15-0.25
•••••
GIM 5C 5.00 0.40 4.00 ••• 0.15-0.30
GIM 6C 6.00 0.40 4.80 •
0.15-0.30
• For cutting speed recommendations and user guide, see pages 542-547
(1) Cutting width tolerance (+/-)
For tools, see pages: GM-DG (374)
GIM-W ±0.1 5
Single-Sided Inserts with
Central Ridged Chipformer and 7°
Reinforced Edge for Parting 15.3 Ref.
and Grooving Alloy Steel
CW BW
RE
Dimensions Tough 1 Hard Recommended
Machining Data
IC328 f groove
IC830
CWTOL(1) IC354
IC908
0.05 IC20
Designation CW RE 0.05 BW (mm/rev)
0.05 •••
GIM 2.4 2.40 0.18 0.05 2.40 ••••• 0.10-0.18
GIM 3 3.00 0.22
3.20 0.22 2.40 ••••• 0.10-0.18
GIM 3.2 4.00 0.25
GIM 4 2.40 ••••• 0.10-0.20
3.20 0.15-0.20
• For cutting speed recommendations and user guide, see pages 542-547
(1) Cutting width tolerance (+/-)
For tools, see pages: GM-DG (374)
375