Page 55 - MILLING CATALOG p319-550
P. 55
SW/S DCONWS LF 3 Typ. SLOTTING & SLITTING CUTTERS
Drive Shanks for SELF-GRIP SW20
Slitting Cutters Screw BD DBC DCONMS DBC DCONMS BD
DCONWS S- Type
LPR
LF
SW- Type
Designation DCONMS BD DBC DCONWS LPR LF kg
14.40 8.00 - 100.00
SW 20 20.00 20.00 13.60 6.00 110.00 0.24
SW 25-23 25.00 23.00 18.00 8.00 25.0 110.00 0.00
22.00 10.00 25.0 110.00 0.43
SW 25-28 25.00 28.00 32.00 22.00 25.0 120.00 0.51
SW 25-32 25.00 32.00 45.00 32.00 30.0 60.00 0.60
63.00 40.00 60.00 0.84
SW 32-40 32.00 40.00 - 1.78
32.00 55.00 -
S 32-55 40.00 80.00
S 40-80
For tools, see pages: GM-DG (374) • SGSA (372) • SGSF (370) • TGSF (364)
Spare Parts SR M5X20 DIN7991 T-15/5 HW 3.0
SR 34-510 T-15/5 HW 6.0
Designation SR 76-961 T-15/5
SW 20 SR 76-961 T-15/5
SW 25-23 SR 76-963
SW 25-28 SR 76-943 BLD T20/M7 SW6-T
SW 25-32 SR 76-944
SW 32-40
S 32-55
S 40-80
R (drive flange set) DCONMS LB D4
Drive Flange Set for BD DBC
Slitting Cutters
DCONMS BD DBC D4 LB
Designation 22.00 46.00 32.00 5.00 10.00
R 22-46 32.00 55.00 45.00 6.00 10.00
R 32-55 40.00 80.00 63.00 11.00 12.00
R 40-80 50.00 110.00 80.00 14.00 14.00
R 50-110
SGSF/A-M-JHP OAL LF CW
Grooving and Slitting Small THSZMS CDX
Diameter Cutters with FLEXFIT
Threaded Adaptation DCONMS DC Bar Max
DRVS
Designation DC CW CDX CICT(1) DCONMS THSZMS LF OAL DRVS(2) Insert TQ_3(3)
SGSF 32-2-M08-3Z-JHP 32.00 2.00 7.80 3 13.00 M08 12.00 29.50 9.6 GSFN 2/GSFU 2.2 20 ESG 1.4-2*
SGSA 32-3-M08-4Z-JHP 32.00 3.00 7.80 4 13.00 M08 12.87 30.37 9.6 GSAN 3... 20 ESG 1.4-2*
SGSF 40-2-M10-4Z-JHP 40.00 2.00 11.80 4 18.00 M10 12.00 29.50 15.0 GSFN 2/GSFU 2.2 29 ESG 1.4-2*
SGSA 40-3-M10-6Z-JHP 40.00 3.00 11.80 6 18.00 M10 12.10 32.10 15.0 GSAN 3... 29 ESG 1.4-2*
• For best performance use internal coolant with "CH" type shanks • When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and
threaded areas must be thoroughly cleaned. Apply appropriate tightening torque to eliminate a gap between the mating faces. Estimated torque values are specified in the
TQ_3 parameter
(1) Number of inserts
(2) Torque key size
(3) Tool tightening torque Nxm (lbfxin)
* Optional, should be ordered separately
For inserts, see pages: GSAN (372) • GSFN (373) • GSFU (373)
For holders, see pages: BT-ODP (FLEXFIT) (314) • C#-ODP (FLEXFIT) (314) • CAB M-M (FLEXFIT) (312) • DIN69871-ODP (315) • ER-ODP (315)
• HSK A-ODP (FLEXFIT) (316) • S M (312) • S M-C-H (312)
371