Page 58 - MILLING CATALOG p319-550
P. 58
SLOTTING & SLITTING CUTTERSGSHT CW CW
IC328Slitting Inserts forREGSHT-K
IC928Specially Tailored Heavy
IC908Duty Slitting Cutters
GSHT
Dimensions Tough 1 Hard
Designation CW RE ••
••
GSHT 6K (1) 5.40 0.00
GSHT 6 6.35 0.50 •
7.00 0.50 •
GSHT 7 8.00 0.50
GSHT 8
(1) To be used in combination with GSHT regular inserts (6-8 mm) for half-effective cutter configuration
Inserts for heavy duty applications for use on specially tailored
cutters, diameter range:
425-810 mm. GSHT-6K chamfered inserts, can
be used in a half-effective configuration to reduce
overload, eliminate chatter, and improve chip flow.
GM-DG CW Shank Drive DCONMS
Slitting Cutters Carrying (SS)
Self-Clamped Inserts Flange Drive Screw
R (CSI)
DC DHUB
THUB a°
S/SW-Shank CDX
Designation CWN(2) CWX(3) DC CICT(4) DCONMS THUB CDX RPMX(5) a° SS CSI Inserts
GM D100-3DG-22K Single-ended:
GM D125-3DG-32K(1) 2.70 3.35 100.00 6 22.00 2.40 29.00 800 90 SW 32-40 R 22-46 GIM 3C/3/3J/3.2, GIMY..
GM D160-3DG-32K Double ended:
GM D200-3DG-40K 2.70 3.35 125.00 8 32.00 2.40 34.00 640 - S 32-55 R 32-55 for Tmax=12.5mm
GM D100-4DG-22K
GM D125-4DG-32K(1) 2.70 3.35 160.00 10 32.00 2.40 39.00 500 90 S 32-55 R 32-55 Single-ended:
GIM 4C/4/4J, GIMY..
GM D200-4DG-40K 2.70 3.35 200.00 14 40.00 2.40 59.00 400 90 S 40-80 R 40-80
Double ended:
3.36 4.35 100.00 6 22.00 3.20 29.00 800 90 SW 32-40 R 22-46 for Tmax=12.5mm
3.36 4.35 125.00 8 32.00 3.20 34.00 640 - S 32-55 R 32-55
3.36 4.35 200.00 14 40.00 3.20 59.00 400 90 S 40-80 R 40-80
• DHUB refers to SW/S drive shanks and R drive flange set • Maximum RPM may not be exceeded • For user guide, see pages 377-383
(1) Only one key slot
(2) Minimum cutting width
(3) Maximum cutting width
(4) Number of inserts
(5) Cutting depth maximum
(6) Maximum RPM
For inserts, see pages: GIM-C (375) • GIM-J (375) • GIM-UT () • GIM-W (375)
For holders, see pages: BT-SEMC (647) • C#-SEMC (623) • DIN2080-SEMC (655) • DIN69871-SEMC (578) • HSK A-SEMC (605) • SW/S (371)
Spare Parts EDG 44A*
Designation
GM-DG
* Optional, should be ordered separately
374 ISCAR