Page 20 - TURNING CATALOG p121-254
P. 20
ISOTURN INSERTSWNMG-WF 80° 95º 95°
IC530NDouble-Sided TrigonL 95°
IC8150Wiper Inserts for Finishing
IC807Operations at High FeedsRE
IC907IC
S
Dimensions Recommended Machining Data
Tough 1 Hard
ap f
Designation L IC S RE (mm) (mm/rev)
• 0.20-3.00
WNMG 060402-WF 6.52 9.52 4.76 0.20 •• 0.05-0.25
WNMG 060404-WF 6.52 9.52 4.76 0.40 0.50-3.00 0.05-0.30
• 0.80-3.50
WNMG 060408-WF 6.52 9.52 4.76 0.80 0.07-0.30
0.80 • •
WNMG 080408-WF 8.70 12.70 4.76 • 0.80-3.50 0.07-0.35
WNMG 080412-WF 8.70 12.70 4.76 1.20 0.80-3.50 0.07-0.35
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
For tools, see pages: A-PWLNR/L-X/G (104) • A/S-MWLNR/L-W (103) • A/S-PWLNR/L (104) • C#-MULNR/L-MW (16) • C#-PWLNR/L-08-JHP (9)
• C#-PWLNR/L-X (13) • C#-PWLNR/L-X-JHP (14) • DWLNR/L (10) • HSK A63WH-MULNR-J12MWX2 (17) • HSK A63WH-MULNR/L-MW (16)
• HSK A63WH-MUMNN-MW (17) • MULNR/L-12MW (15) • MWLNR/L-W (18) • PWLNR/L (8) • PWLNR/L-08-JHP (9) • PWLNR/L-X (11) • PWLNR/L-X-JHP (12)
• PWLNR/L-X-JHP-MC (13) • S-DWLNR/L (99) • S-MULNR-MW (105) • DWLNR/L-JHP-MC (10)
WNMG-PP 80° 95° 95º
Double-Sided Trigon Inserts for L 95°
Machining Very Ductile Materials
at Medium Cutting Conditions RE S Recommended
IC Machining Data
Dimensions
Tough 1 Hard
IC28 ap f
IC830
Designation L IC S RE IC8350 (mm) (mm/rev)
IC6025 1.00-3.00 0.14-0.30
IC8250 1.00-3.00 0.14-0.30
IC30N 1.00-3.00 0.14-0.30
IC530N 1.00-3.00 0.14-0.30
IC10 1.00-3.50 0.14-0.30
IC6015 1.00-4.00 0.14-0.30
IC8150 1.50-5.00 0.18-0.40
IC520M
IC20
IC20N
IC806
IC807
IC907
WNMG 06T304-PP 6.52 9.52 3.97 0.40 • • •• • ••
•• • • ••
WNMG 06T308-PP 6.52 9.52 3.97 0.80 •• ••
WNMG 060404-PP 6.52 9.52 4.76 0.40 • ••
WNMG 060408-PP 6.52 9.52 4.76 0.80 •••• ••• ••
WNMG 080404-PP 8.70 12.70 4.76 0.40 •••• ••••
WNMG 080408-PP 8.70 12.70 4.76 0.80 • • • • •
WNMG 080412-PP 8.70 12.70 4.76 1.20 •• •
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
For tools, see pages: A-PWLNR/L-X/G (104) • A/S-MWLNR/L-W (103) • A/S-PWLNR/L (104) • C#-MULNR/L-MW (16) • C#-PWLNR/L-08-JHP (9)
• C#-PWLNR/L-X (13) • C#-PWLNR/L-X-JHP (14) • DWLNR/L (10) • E-PWLNR/L-HEAD (105) • HSK A63WH-MULNR-J12MWX2 (17) • HSK A63WH-MULNR/L-MW (16)
• HSK A63WH-MUMNN-MW (17) • MULNR/L-12MW (15) • MWLNR/L-W (18) • PWLNR/L (8) • PWLNR/L-08-JHP (9) • PWLNR/L-X (11) • PWLNR/L-X-JHP (12)
• PWLNR/L-X-JHP-MC (13) • S-DWLNR/L (99) • S-MULNR-MW (105) • DWLNR/L-JHP-MC (10)
140 ISCAR
