Page 22 - TURNING CATALOG p121-254

ISOTURN INSERTS WNMM-NM 80° 95° 95º
Single-Sided Trigon Inserts L 95°
for Roughing Applications
Recommended Machining Data
RE S
IC

Dimensions

IC8250 ap f
(mm/rev)
Designation L IC S RE (mm) 0.20-0.50
0.80 • 1.50-5.00
WNMM 080408-NM 8.70 12.70 4.76 95º 95°
95°
• For user guide and cutting speed recommendations, see pages 122-134, 236-248

For tools, see pages: A/S-MWLNR/L-W (103) • A/S-PWLNR/L (104) • C#-MULNR/L-MW (16) • C#-PWLNR/L-08-JHP (9) • DWLNR/L (10)

• HSK A63WH-MULNR-J12MWX2 (17) • HSK A63WH-MULNR/L-MW (16) • HSK A63WH-MUMNN-MW (17) • MULNR/L-12MW (15) • MWLNR/L-W (18)

• PWLNR/L (8) • PWLNR/L-08-JHP (9) • PWLNR/L-X (11) • PWLNR/L-X-JHP (12) • PWLNR/L-X-JHP-MC (13) • S-DWLNR/L (99) • S-MULNR-MW (105)
• DWLNR/L-JHP-MC (10)

WNMG-NR 80°
Double-Sided Trigon Inserts L
with a Special Chipformer
for Heavy Machining RE
IC
S

Dimensions Tough 1 Hard Recommended Machining Data

IC8250 ap f
IC8150
Designation L IC S RE IC5010 (mm) (mm/rev)
IC807
IC907

WNMG 080408-NR 8.70 12.70 4.76 0.80 • ••• 1.00-5.00 0.18-0.50
•••••
WNMG 080412-NR 8.70 12.70 4.76 1.20 2.00-5.00 0.23-0.55
1.60 • •
WNMG 080416-NR 8.70 12.70 4.76 2.00-5.00 0.30-0.60

• For user guide and cutting speed recommendations, see pages 122-134, 236-248

For tools, see pages: A/S-MWLNR/L-W (103) • A/S-PWLNR/L (104) • C#-MULNR/L-MW (16) • C#-PWLNR/L-08-JHP (9) • DWLNR/L (10)
• HSK A63WH-MULNR-J12MWX2 (17) • HSK A63WH-MULNR/L-MW (16) • HSK A63WH-MUMNN-MW (17) • MULNR/L-12MW (15) • MWLNR/L-W (18) • PWLNR/L (8)
• PWLNR/L-08-JHP (9) • PWLNR/L-X (11) • PWLNR/L-X-JHP (12) • PWLNR/L-X-JHP-MC (13) • S-DWLNR/L (99) • S-MULNR-MW (105) • DWLNR/L-JHP-MC (10)

WNMG-TNM 80° 95° 95º
Double-Sided Trigon Inserts L 95°
for Semi-Roughing and
Roughing Applications RE Recommended Machining Data
IC
S
Dimensions
Tough 1 Hard

IC830 ap f
IC8350
Designation L IC S RE IC8250 (mm) (mm/rev)
IC807 0.25-0.45
IC907 0.25-0.45
0.25-0.65
WNMG 080408-TNM 8.70 12.70 4.76 0.80 • 2.00-4.50 0.25-0.65
• 2.00-4.50 0.30-0.65
WNMG 080412-TNM 8.70 12.70 4.76 1.20 ••••

WNMG 130612-TNM 13.03 19.05 6.35 1.20 •• 2.50-7.00

WNMG 130616-TNM 13.03 19.05 6.35 1.60 • 2.50-7.00
2.40 •
WNMG 130624-TNM 13.03 19.05 6.35 3.00-7.00

• This inserts should be used with SEAT IWSN 635M3 only! • For user guide and cutting speed recommendations, see pages 122-134, 236-248

For tools, see pages: A/S-MWLNR/L-W (103) • A/S-PWLNR/L (104) • C#-MULNR/L-MW (16) • C#-PWLNR/L-08-JHP (9) • DWLNR/L (10)

• HSK A63WH-MULNR-J12MWX2 (17) • HSK A63WH-MULNR/L-MW (16) • HSK A63WH-MUMNN-MW (17) • MULNR/L-12MW (15) • MWLNR/L-13W (18)

• MWLNR/L-W (18) • PWLNR/L (8) • PWLNR/L-08-JHP (9) • PWLNR/L-X (11) • PWLNR/L-X-JHP (12) • PWLNR/L-X-JHP-MC (13) • S-DWLNR/L (99)

• S-MULNR-MW (105) • DWLNR/L-JHP-MC (10)

142 ISCAR