Page 76 - TURNING CATALOG p121-254
P. 76
ISOTURN INSERTS 52° 50° 70°MAX
MAX MAX
VCMT-M3M 35°
35° Rhombic Positive Flank IC D1 91° 93° 72.5º
Inserts for Machining Stainless RE L 7° 31° 117.5°
and Low Carbon Steel S MAX 30°
Dimensions MAX
Tough 1 Hard 112°
93º
48° 35° 95º
MAX MAX
95º 107.5º
Recommended
Machining Data
IC6025 ap f
IC6015
Designation L IC S RE D1 IC807 (mm) (mm/rev)
VCMT 160404-M3M 16.60 9.52 4.76 0.40 4.40 ••• 1.00-5.00 0.07-0.25
4.40 • •
VCMT 160408-M3M 16.60 9.52 4.76 0.80 ••• 1.00-5.00 0.10-0.30
VCMT 160412-M3M 16.60 9.52 4.76 1.20 4.40 1.00-5.00 0.13-0.35
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
For tools, see pages: A/S-SVLBCR/L (114) • A/S-SVLFCR/L; A-SVUCR/L (113) • A/S-SVQCR/L (113) • AVC-SVLCR/L-VH (98) • C#-SVJCR/L (66)
• C#-SVJCR/L-JHP (66) • C#-SVVCN (69) • HSK A63WH-SVJCR/L (67) • SVJCR/L (453) • SVJCR/L-16-JHP (454) • SVVCN (454) • SVXCR/L (454) • AVC-SVLCR/L (96)
52° 50° 70°MAX
MAX MAX
VCMT-FPC-CERMET 35°
35° Rhombic 7° Cermet Positive IC D1 91° 93° 72.5º
Flank Inserts for RE L 7° 31° 117.5°
Semi-Finishing Turning of steel S MAX 30°
and Automotive Components Dimensions MAX
Tough 1 Hard 112°
93º
48° 35° 95º
MAX MAX
95º 107.5º
Recommended Machining Data
IC20N ap f
IC520N
Designation L IC S RE (mm) (mm/rev)
••
VCMT 160404-FPC 16.60 9.52 4.76 0.40 0.70-2.00 0.04-0.22
• 0.70-2.00
VCMT 160408-FPC 16.60 9.52 4.76 0.80 0.04-0.22
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
For tools, see pages: A/S-SVLBCR/L (114) • A/S-SVLFCR/L; A-SVUCR/L (113) • A/S-SVQCR/L (113) • AVC-SVLCR/L-VH (98) • C#-SVJCR/L (66)
• C#-SVJCR/L-JHP (66) • C#-SVVCN (69) • HSK A63WH-SVJCR/L (67) • SVJCR/L (453) • SVJCR/L-16-JHP (454) • SVVCN (454) • SVXCR/L (454) • AVC-SVLCR/L (96)
52° 50° 70°MAX 31°
MAX MAX MAX
VCGT-F1M-20P 35°
35° Rhombic Inserts with a 7° 91° 93° 72.5º 112°
Positive Flank for Semi-Finishing D1
and Finish Turning on Soft IC 7° 30° 48° 35°
Materials and Exotic Alloys RE L MAX MAX MAX
S
Dimensions 117.5° 93º 95º 107.5º
142º
95º
93º
Recommended Machining Data
IC1008 ap f
Designation L IC S RE D1 (mm) (mm/rev)
2.90 • 0.03-0.18 0.07-4.50
VCGT 1103005-F1M-20P 11.07 6.35 3.18 0.10 2.90 • 0.03-0.18 0.30-4.50
0.07-4.00
VCGT 110301-F1M-20P 11.07 6.35 3.18 0.40 2.90 • 0.03-0.15 0.30-4.00
VCGT 110302-F1M-20P 11.07 6.35 3.18 0.10 2.90 • 0.03-0.15
VCGT 110304-F1M-20P 11.07 6.35 3.18 0.40
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
For tools, see pages: AVC-SVUCR/L (95) • C#-SVJCR/L (66) • C#-SVJCR/L-JHP (66) • NQCH-SVACR/L-S-JHP (67) • NQCH-Y-SVJCR-S-JHP (65)
• PVACR/L-JHP (68) • PVACR/L-JHP-MC (68) • PVACR/L-S (64) • S/A-SVJCR/L (114) • SVACR/L (67) • SVJCR-PAD (67) • SVJCR/L (453)
• SVPCR/L (69) • SVVCN (454) • Y-SVJCR (65) • Y-SVJCR-JHP (65)
196 ISCAR
